|
ET16-6T-SM1 Datasheet, PDF (1/2 Pages) Tyco Electronics – E-Series RF 16:1 Transformer 0.06 - 60 MHz | |||
|
E-Series RF 16:1 Transformer
0.06 â 60 MHz
Features
⢠16:1 Impedance Ratio
⢠CT on Secondary
⢠Surface Mount
⢠Tape and reel packaging available
Description
M/A-COMâs ET16-6T-SM1 is a 16:1 RF transformer
in a low cost, surface mount package. Ideally suited
for high volume cellular and wireless applications.
Typical applications include single to balanced mode
conversion and impedance matching. Parts are
packaged in tape & reel.
SM - 1 Package
ET16-6T-SM1
V1
Electrical Specifications: TA = 25°C, Z0 = 50⦠1
Parameter
RF Frequency
Insertion Loss
Amplitude Unbalance
Phase Unbalance
Test Conditions
â
FLâfU
FLâfU
FLâfU
Frequency
0.06 - 60
0.06 - 60
0.08 - 40
0.15 - 15
0.06 - 30
0.06 - 60
0.06 - 20
0.06 - 60
Units
Min
Typ
Max
MHz
â
â
â
dB
â
â
3.0
dB
â
â
2.0
dB
â
â
1.0
dB
â
â
0.3
dB
â
â
0.6
Degrees
â
â
1°
Degrees
â
â
4°
Absolute Maximum Ratings 1
Parameter
RF Power
DC Current
Operating Temperature
Storage Temperature
Absolute Maximum
250 mW
30 mA
-40°C to +85°C
-55°C to +125°C
1. Operation of this device above any one of these parameters
may cause permanent damage.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
Ordering Information
Part Number
ET16-6T-SM1TR
Package
Tape and Reel (900 piece Reel)
⢠North America Tel: 800.366.2266 / Fax: 978.366.2266
⢠Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
⢠Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
|
▷ |