EMD40-900L Datasheet, PDF (1/2 Pages) Tyco Electronics – E-Series HMIC Double Balanced Mixer 700 - 1400 MHz

ISO 9001
CERTIFIED
E-Series HMIC Double Balanced Mixer
700 - 1400 MHz
EMD40-900L
Features
* SOIC-8 package
* IC process
* Low profile
* LO Drive +3dBm to +7dBm
Description
M/A-COM’s EMD40-900L is a passive double balanced
mixer in a low cost, surface mount SOIC-8 package.
Fabricated using a mature silicon process (HMIC), it is
ideally suited for high volume cellular and wireless
applications. Typical applications include frequency
up/down conversion, modulation and demodulation in
GSM, AMPS, DAMPS and JDC frequencies.
Pin Configuration
Schematic
Pin
Function
Pin
Function
1
GND
5
LO
2
GND
6
GND
3
GND
7
GND
4
IF
8
RF
NOTE: LO and RF ports may be interchanged with a slight degradation
in electrical performance.
Ordering Information
Part Number
EMD40-900L
EMD40-900LTR
Packaging
Tube
Tape and Reel
Specifications @ 25°C
Frequency Range
700 - 1400 MHz
Conversion Loss
700 - 800 MHz
800 - 1000 MHz
1000 – 1250 MHz
1250 - 1400 MHz
Maximum
9.5 dB
8.0 dB
10.5 dB
12.0 dB
Mean (x)
6.40 dB
6.09 dB
9.02 dB
11.02 dB
Sigma (σ)
.24
.08
.21
.21
L - R Isolation
700 - 1000 MHz
1000 - 1400 MHz
Minimum
26.0 dB
24.0 dB
Typical
34.2 dB
30.3 dB
L - I Isolation
700 - 1000 MHz
Minimum
24.0 dB
Typical
28.5 dB
1000 - 1400 MHz
21.0 dB
26.5 dB
LO VSWR
700 - 1000 MHz
Maximum
2.30
Typical
1.90
1000 - 1400 MHz
5.00
2.82
RF VSWR
700 - 1000 MHz
1000 - 1400 MHz
Maximum
2.60
4.40
Typical
1.43
3.35
IF VSWR
DC - 400 MHz
Maximum
1.80
Typical
1.20
Input IP3
700 - 1000 MHz
1000 - 1400 MHz
Minimum
9.0 dBm
10.5 dBm
Typical
13.0 dBm
15.2 dBm
IF 1.0 dB Bandwidth
Input 1dB Compression
DC - 500MHz
+1.0 dBm
Test conditions: LO drive = +7dBm, IF frequency = 60MHz. Mean and sigma, calculated at 750MHz, 850MHz and 1200MHz, represent typical
variation within a wafer. S1231E
Specifications Subject to Change Without Notice
AMP M/A-COM Eurotec * Loughmahon Technology Park * Blackrock * Cork * Ireland * Tel: [phone] * Fax: [phone]