E-326 Datasheet, PDF (1/1 Pages) Tyco Electronics – Phase Rotation Sensor 1 Amp, 115 VAC

Phase Rotation Sensor
HARTMAN Aerospace Power Products
E-326 1 Amp, 115 VAC
Features:
• Controls External Relay
• Epoxy Encapsulated
• 115 VAC, 400 Hz, 3Ø Operation
• 1 Amp
• High Reliability
• Meets many requirements of MIL-R-6106
• Light Weight Construction
CONTACTOR CONFIGURATION
Notes:
Dimensions for this product are expressed in inches.
Multiply values by 25.4 for millimeters.
PRODUCT SPECIFICATIONS
Construction
Epoxy Encapsulated
Operating Voltage and Frequency
Continuous Duty, 115V, 3 Phase, L to N, 400 Hz
Max. Input Voltage Range for Normal Operation
115 ±20V
Operation
The phase rotation sensor will apply a DC potential of
+28V to any external relay coil or load when the phase
rotation is A-B-C and shall remove the +28V signal
when phase rotation is other than A-B-C.
Normal Load
1 Amp Continuous
5 Amps Intermittent (.020 Second Maximum)
Environmental:
Temperature Operating
-55°C to +71°C
Vibration
.060 DA 5 to 55 Hz
Acceleration
55 - 200 Hz Log Constant
Weight
4.5 Oz.
For factory-direct application assistance, contact the HARTMAN
product team at [phone], Fax [phone].
© 2004 by Tyco Electronics Corporation. All Rights Reserved.
HARTMAN and TYCO are trademarks.
Catalog (web doc only)
Revised 5-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967