DSS-333 Datasheet, PDF (1/2 Pages) Tyco Electronics – Surface Mount Two-Way Power Divider 10 - 500 MHz

Surface Mount Two-Way Power Divider,
10 - 500 MHz
Features
• Fully Hermetic Package
• Phase Balance: 0.5^o Typical
• Isolation: 40 dB Typical Midband
• VSWR: 1.05:1 Typical Midband
• Impedance: 50 Ohms Nominal
• Maximum Power Rating or Input Power: 1 Watt Max.
• Internal Load Dissipation: 0.05 Watts Max.
• MIL-STD-202 Screening Available
SF-1
Description
A Power Divider is ideally a lossless reciprocal
device which can also perform vector summation of two
or more signals and thus is sometimes called a power
combiner or summer.
Pin Configuration
Pin No.
1
2
Function
Σ IN
Output C
Pin No.
3
4
Function
GND
Output D
DSS-333
V3
Electrical Specifications¹: T_A = -55°C to +85°C
Parameter
Insertion Loss
Isolation
Test Conditions
Less Coupling
—
Frequency
10 - 500 MHz
10 - 500 MHz
Amplitude Balance
—
10 - 500 MHz
Phase Balance
—
10 - 500 MHz
VSWR
All Ports
10 - 500 MHz
Units
Min
Typ
Max
dB
—
—
0.6
dB
25
—
—
dB
—
—
0.15
°
—
—
2
Ratio
—
—
1.4:1
1. All specifications apply with 50 ohm source and load impedance.
This product contains elements protected by United States Patent Number 3,428,920.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: [phone] / Fax: [phone]
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macom.com for additional data sheets and product information.