DS56-0006 Datasheet, PDF (1/2 Pages) Tyco Electronics – Low Cost Six-Way SMT Power Divider 1700 - 2000 MHz

Low Cost Six-Way SMT Power Divider
1700 - 2000 MHz
Features
• Small Size, Low Profile
• Superior Repeatability (Lot-to-lot Variation)
• Industry Standard SOIC-16 SMT Plastic Package
• Typical Isolation 25dB
• Typical Insertion Loss 1.0dB
• Low Cost
SOIC-16
DS56-0006
Description
M/A-COM’s DS56-0006 is an IC-based monolithic power
splitter/combiner in a low cost SOIC-16 plastic package. This 6-
way power divider is ideally suited for applications where PCB
real estate is at a premium and standard packaging for automated
assembly and low cost are critical. Typical applications include
base stations, portables, and peripheral devices (PCMCIA cards)
for wireless standards such as PCS, PCN, DECT, PHS, and DCS-
1800. Available in Tape and Reel.
The DS56-0006 is fabricated using a passive-integrated circuit
process. The process features full-chip passivation for increased
performance and reliability.
1. All specifications apply with a 50-Ohm source and load impedance.
Typical Electrical Specifications¹, T_A = +25°C
Parameter
Insertion Loss above 7.8dB
1700—2000 MHz
1850—1910 MHz
Isolation
1700—2000 MHz
1850—1910 MHz
VSWR Input
1700—2000 MHz
1850—1910 MHz
Output
1700—2000 MHz
1850—1910 MHz
Amplitude Balance
1700—2000 MHz
1850—1910 MHz
Phase Balance
1700—2000 MHz
1850—1910 MHz
Units
dB
dB
dB
dB
—
—
—
—
dB
dB
°
Ordering Information
Part Number
Package
DS56-0006
DS56-0006-TR
DS56-0006-RTR
SOIC-16 Lead Plastic Package
Forward Tape and Reel¹
Reverse Tape and Reel¹
1. If specific reel size is required, consult factory for part number
assignment.
Min
Typ
Max
—
1.3
1.8
—
1.0
1.5
18
25
—
21
26
—
—
1.7 : 1
2.0 : 1
—
1.3 : 1
1.7 : 1
—
1.3 : 1
1.7 : 1
—
1.1 : 1
1.3 : 1
—
0.8
1.3
—
1.0
1.3
—
10
20
—
8
16
V2.00
www.macom.com
M/A-COM Division of AMP Incorporated s North America: Tel. [phone], Fax [phone] s Asia/Pacific: Tel.[phone],
Fax [phone] s Europe: Tel. [phone], Fax[phone]
AMP and Connecting at a Higher Level are trademarks.
Specifications subject to change without notice.