DS56-0005 Datasheet, PDF (1/2 Pages) Tyco Electronics – Low Cost Six-Way SMT Power Divider 824 - 960 MHz

Low Cost Six-Way SMT Power Divider
824 - 960 MHz
Features
• Small Size, Low Profile
• Superior Repeatability (Lot-to-lot Variation)
• Industry Standard SOIC-16 SMT Plastic Package
• Typical Isolation 25dB
• Typical Insertion Loss 0.8dB
• Low Cost
SOIC-16
DS56-0005
Description
M/A-COM’s DS56-0005 is an IC-based monolithic power divider
in a low cost SOIC-16 plastic package. This 6-way power divider
is ideally suited for applications where PCB real estate is at a
premium and part count reduction and cost are critical. Typical
applications include base station switching networks and other
cellular equipment, including subscriber units. Available in Tape
and Reel.
The DS56-0005 is fabricated using a passive-integrated circuit
process. The process features full-chip passivation for increased
performance and reliabilty.
Ordering Information
Part Number
Package
DS56-0005
DS56-0005-TR
DS56-0005-RTR
SOIC-16 Lead Plastic Package
Forward Tape and Reel¹
Reverse Tape and Reel¹
1. If specific reel size is required, consult factory for part number
assignment.
Typical Electrical Specifications¹, T_A = +25°C
Parameter
Units
Min
Insertion Loss above 7.8dB
dB
—
Isolation
dB
20
VSWR Input
Output
—
—
—
—
Amplitude Balance
dB
—
Phase Balance
°
—
1. All specifications apply with a 50-Ohm source and load impedance.
Specifications subject to change without notice.
North America: Tel. [phone], Fax [phone]
Asia/Pacific: Tel.[phone], Fax [phone]
Europe: Tel. [phone], Fax[phone]
Visit www.macom.com for additional data sheets and product information.
Typ
0.8
25
1.4 : 1
1.3 : 1
0.5
4
Max
1.2
—
1.8 : 1
1.5 : 1
0.9
8
V 3.0
1