DS56-0001 Datasheet, PDF (1/2 Pages) Tyco Electronics – Low Cost Six-Way SMT Power Divider 824 - 960 MHz

Six-Way SMT Power Divider
DS56-0001
DS56-0001
Low Cost Six-Way SMT Power Divider
824 - 960 MHz
Features
• Small Size, Low Profile
• Superior Repeatability (Lot-to-lot Variation)
• Industry Standard SOW-16 SMT Plastic Package
• Typical Isolation: 25 dB
• Typical Insertion Loss: 0.3 dB
• Low Cost
• 1 Watt Power Handling
Description
M/A-COM’s DS56-0001 is an IC-based monolithic power divider
in a low cost SOW-16 plastic package. This 6-way power divider
is ideally suited for applications where PCB real estate is at a
premium and part count reduction and cost are critical. Typical
applications include base station switching networks and other
cellular equipment, including subscriber units. Available in tape
and reel.
The DS56-0001 is fabricated using a passive-integrated circuit
process. The process features full-chip passivation for increased
performance and reliability.
Typical Electrical Specifications¹, T_A= +25ºC
Parameters
Insertion Loss Above 7.0 dB
Isolation
VSWR
Amplitude Balance
Phase Balance
Units
dB
dB
—
dB
°
1. All specifications apply with a 50-ohm source and load impedance.
SOW-16
Pin 16
Orientation
Mark
.394-.419
-B-
(10.00-10.65)
.010(0.25) M B M
Pin 1
.004 (0.10)
.3977-.4133
(10.10-10.50)
-A-
.0926-.1043
(7.40-7.60)
0-8
-C-
.010-.029 x
45 Chamfer
(0.25-0.75)
0.050(1.27) BSC.
.0040-.0118
.013-.020 TYP (0.10-0.30)
(0.33-0.51)
.010(0.25) M C A M B S
.016-.050
(0.40-1.27)
.0091-.0125
(0.23-0.32)
16-Lead SOP outline dimensions
Wide body (.300)
(All dimensions per JEDEC No. MS-013-AA, Issue C)
Dimensions in ( ) are in mm.
Unless Otherwise Noted: .xxx = 0.010 (.xx = 0.25)
.xx = 0.02 (.x = 0.5)
Ordering Information
Part Number
Package
DS56-0001
DS56-0001-TR
DS56-0001-RTR
SOW 16-Lead Plastic Package
Forward Tape and Reel¹
Reverse Tape and Reel¹
1. If specific reel size is required, consult factory for part number
assignment.
Min.
—
20
—
—
—
Typ.
1.3
25
1.4:1
0.2
6
Max.
1.5
—
1.6:1
0.5
8
M/A-COM Division of AMP Incorporated s North America: Tel. [phone], Fax [phone] s Asia/Pacific: Tel.[phone], Fax [phone] s
Europe: Tel. [phone], Fax[phone]
www.macom.com
AMP and Connecting at a Higher Level are trademarks.
Specifications subject to change without notice.
V4.00