DS55-0003 Datasheet, PDF (1/2 Pages) Tyco Electronics – Low Cost Five-Way GMIC SMT Power Divider 1850-1990 MHz

DS55-0003
Low Cost Five-Way GMIC SMT Power Divider
1850-1990 MHz
Features
• Small Size, Low Profile
• Superior Repeatability (Lot-to-Lot Variation)
• Industry Standard SOIC-16 SMT Plastic Package
• Typical Isolation: 28 dB
• Typical Insertion Loss: 0.7 dB
• Low Cost
• 1 Watt Power Handling
Description
M/A-COM’s DS55-0003 is an IC-based monolithic power
divider using M/A-COM’s GMIC technology in a low cost
SOIC-16 plastic package. This 5-way power divider is ideally
suited for applications where PCB real estate is at a premium and
part count reduction and cost are critical. Typical applications
include base station switching networks and other cellular
equipment, including subscriber units. Available in tape and
reel.
The DS55-0003 is fabricated using a passive-integrated circuit
process. The process features full-chip passivation for increased
performance and reliability.
SOIC-16
Ordering Information
Part Number
Package
DS55-0003
DS55-0003-TR
DS55-0003-RTR
SOIC-16 Lead Plastic Package
Forward Tape and Reel¹
Reverse Tape and Reel¹
1. If specific reel size is required, consult factory for part number
assignment.
Typical Electrical Specifications¹, T_A = +25°C
Parameter
Units
Min
Insertion Loss
Above 6.0dB
dB
—
Isolation
dB
21
VSWR
Input
—
—
VSWR
Output
—
—
Amplitude Balance
dB
—
Phase Balance
°
—
1. All specifications apply with a 50-Ohm source and load impedance.
Typ
0.7
28
1.5:1
1.2:1
0.2
6
Max
1.2
—
1.6:1
1.5:1
0.5
12
Specifications subject to change without notice.
V 2.0
North America: Tel. [phone], Fax [phone]
1
Asia/Pacific: Tel.[phone], Fax [phone]
Europe: Tel. [phone], Fax[phone]
Visit www.macom.com for additional data sheets and product information.