DS53-0005 Datasheet, PDF (1/2 Pages) Tyco Electronics – Low Cost Three-Way GMIC SMT Power Divider 1850 . 1990 MHz

Low Cost Three-Way GMIC SMT Power Divider
DS53-0005
DS53-0005
Preliminary Specifications
Low Cost Three-Way GMIC SMT Power Divider
1850 – 1990 MHz
Features
• Small Size and Low Profile
• Industry Standard SOIC-8 SMT Plastic Package
• Excellent Amplitude and Phase Balance
• Superior Repeatability
• Typical Insertion Loss: 1.0 dB
• Typical Isolation: 18 dB
• 1 Watt Power Handling
SOIC-8
Description
M/A-COM’s DS53-0005 is an IC-based monolithic power divider
using M/A-COM’s GMIC technology in a low cost SOIC-8 plastic
package. This 3-way power divider is ideally suited for
applications where small size, low insertion loss, superior phase/
amplitude tracking and low cost are required. Typical applications
include personal communication systems and other commun-
ication applications where size and PCB real estate are at a
premium. Available in tape and reel.
The DS53-0005 is fabricated using a passive-integrated circuit
process. The process features full-chip passivation for increased
performance and reliability.
Ordering Information
Part Number
Package
DS53-0005
DS53-0005-TR
DS53-0005-RTR
SOIC 8-Lead Plastic Package
Forward Tape and Reel¹
Reverse Tape and Reel¹
1. If specific reel size is required, consult factory for part number
assignment.
Typical Electrical Specifications¹, T_A= +25ºC
Parameters
Units
Insertion Loss Above 4.8 dB
dB
Isolation
dB
VSWR Input
—
Amplitude Balance
dB
Phase Balance
°
1. All specifications apply with a 50-ohm source and load impedance.
Min.
—
12
—
—
—
Typ.
1.0
18
1.8:1
0.3
7
Max.
1.4
—
2.0:1
0.6
14
M/A-COM Division of AMP Incorporated s North America: Tel. [phone], Fax [phone] s Asia/Pacific: Tel.[phone], Fax [phone]
s Europe: Tel. [phone], Fax[phone]
www.macom.com
AMP and Connecting at a Higher Level are trademarks.
The preliminary specifications data sheet contains typical electrical specifications which may change prior to final introduction.
V1.00