DS52-0007 Datasheet, PDF (1/2 Pages) Tyco Electronics – Low Cost Two-Way GMIC SMT Power Divider 2200 - 2500 MHz

Low Cost Two-Way GMIC SMT Power Divider — 2200 - 2500MHz
Low Cost Two-Way GMIC SMT Power Divider
2200 - 2500 MHz
Features
• Small Size and Low Profile
• Industry Standard SOT-25 SMT Plastic Package
• Typical Isertion Loss: 1.0 dB
• Typical Amplitude Balance 0.1 dB
• 1 Watt Power Handling
SOT-25
DS52-0007
DS52-0007
Description
M/A-COM’s DS52-0007 is an IC-based monolithic
power divider using M/A-COM’s GMIC technology in a
low cost SOT-25 plastic package. This 2-way power
divider is ideally suited for applications where small
size, low insertion loss, superior phase/amplitude
tracking and low cost are required. Typical applications
include handsets, base station switching networks and
other communication applications where size and PCB
real estate are at a premium. Available in Tape and
Reel.
The DS52-0007 is fabricated using a passive-integrated
circuit process. The process features full-chip
passivation for increased performance and reliability.
All lower dimensions are in millimeters
Ordering Information
Part Number
DS52-0007
DS52-0007-TR
DS52-0007-RTR
Package
SOT-25Lead Plastic Package
Forward Tape and Reel¹
Reverse Tape and Reel¹
1. If specific reel size is required, consult factory for part number
assignment.
Typical Electrical Specifications¹, T_A = +25°C
Parameter
Units
Min
Insertion Loss above 3.0dB
dB
—
Isolation
dB
15
VSWR
RF Input
—
—
RF1, RF2 Outputs
—
—
Amplitude Balance
dB
—
Phase Balance
Degrees
—
1. All specifications apply with a 50-Ohm source and load impedance.
Typ
1.0
22
1.6 : 1
1.3 : 1
0.1
2.0
Max
1.1
—
1.8 : 1
1.5 : 1
0.25
4.0
V2.00 S1502 A
www.macom.com
M/A-COM Division of AMP Incorporated s North America: Tel. [phone], Fax [phone] s Asia/Pacific: Tel.[phone],
Fax [phone] s Europe: Tel. [phone], Fax[phone]
AMP and Connecting at a Higher Level are trademarks.
Specifications subject to change without notice.