DS52-0004 Datasheet, PDF (1/2 Pages) Tyco Electronics – Low Cost Two-Way SMT Power Diveder 1510-1660MHz

Low Cost Two-Way SMT Power Divider 1510-1660 MHz
Low Cost Two-Way SMT Power Divider 1510-
1660 MHz
Features
• Small Size and Low Profile
• Industry Standard SOIC-8 SMT Plastic Package
• Excellent Amplitude and Phase Balance
• Superior Repeatability
• Typical Insertion Loss 0.4 dB
• Typical Isolation 20 dB
• 1 Watt Power Handling
• Frequency Coverage for GPS and LEO Programs
SOIC-8
DS52-0004
DS52-0004
Description
M/A-COM’s DS52-0004 is an IC-based monolithic power divider in
a low cost SOIC-8 plastic package. This 2-way power divider is
ideally suited for applications where small size, low insertion loss,
superior phase/amplitude tracking and low cost are required.
Typical applications include base station switching networks and
other communication applications where size and PCB real estate are
a premium. Available in tape and reel.
The DS52-0004 is fabricated using a passive-integrated circuit
process. The process features full-chip passivation for increased
performance and reliability.
Ordering Information
Part Number
Package
DS52-0004
DS52-0004-TR
DS52-0004-RTR
SOIC-8 Lead Plastic Package
Forward Tape and Reel¹
Reverse Tape and Reel¹
1. If specific reel size is required, consult factory for part number
assignment.
Typical Electrical Specifications¹, T_A = +25°C
Parameter
Units
Min
Insertion Loss
Above 3.0dB
dB
—
Isolation
dB
15
VSWR
Input RL
—
—
VSWR
Output RL
—
—
Amplitude Balance
dB
—
Phase Balance
°
—
Typ
0.4
20
1.3:1
1.4:1
0.1
1.0
Max
0.6
—
1.5:1
1.6:1
0.2
3.0
1. All specifications apply with a 50-Ohm source and load impedance.
S 1561B VER 3
www.macom.com
M/A-COM Division of AMP Incorporated n North America: Tel. [phone], Fax [phone] n Asia/Pacific: Tel.[phone],
Fax [phone] n Europe: Tel. [phone], Fax[phone]
AMP and Connecting at a Higher Level are trademarks.
Specifications subject to change without notice.