DS52-0002 Datasheet, PDF (1/2 Pages) Tyco Electronics – Low Cost Two-Way SMT Power Divider 1920- 2170 MHz

Low Cost Two-Way SMT Power Divider 1920– 2170 MHz
Low Cost Two-Way SMT Power Divider 1920-
2170 MHz
Features
• Small Size and Low Profile
• Industry Standard SOIC-8 SMT Plastic Package
• Excellent Amplitude and Phase Balance
• Superior Repeatability
• Typical Insertion Loss 0.7 dB
• Typical Isolation 21 dB
• 1 Watt Power Handling
SOIC-8
DS52-0002
Description
M/A-COM’s DS52-0002 is an IC-based monolithic power divider in
a low cost SOIC-8 plastic package. This 2-way power divider is
ideally suited for applications where small size, low insertion loss,
superior phase/amplitude tracking and low cost are required.
Typical applications include base station switching networks and
other communication applications where size and PCB real estate are
a premium. Available in tape and reel.
The DS52-0002 is fabricated using a passive-integrated circuit
process. The process features full-chip passivation for increased
performance and reliability.
Ordering Information
Part Number
Package
DS52-0002
DS52-0002-TR
DS52-0002-RTR
SOIC-8 Lead Plastic Package
Forward Tape and Reel¹
Reverse Tape and Reel¹
1. If specific reel size is required, consult factory for part number
assignment.
Typical Electrical Specifications¹, T_A = +25°C
Parameter
Units
Min
Insertion Loss
Above 3.0dB
dB
—
Isolation
dB
15
VSWR
Input RL
—
—
VSWR
Output RL
—
—
Amplitude Balance
dB
—
Phase Balance
°
—
Typ
0.7
21
1.7:1
1.5:1
0.06
1.0
Max
0.9
—
2.0:1
1.7:1
0.20
3.0
1. All specifications apply with a 50-Ohm source and load impedance.
S 1560C VER 3
www.macom.com
M/A-COM n North America: Tel. [phone], Fax [phone] n Asia/Pacific: Tel.[phone], Fax [phone] n
Europe: Tel. [phone], Fax[phone]
Specifications subject to change without notice.