DS-332 Datasheet, PDF (1/2 Pages) Tyco Electronics – Two-Way Power Divider 1000 - 2000 MHz

Two-Way Power Divider
1000 - 2000 MHz
Features
q 2° Phase Balance Typical
q 20 dB Typical Midband Isolation
q 1.25:1 Typical Midband VSWR, Input
Guaranteed Specifications* (From -55°C to +85°C)
Frequency Range
Insertion Loss (Less coupling)
Isolation
Amplitude Balance
Phase Balance
VSWR (All Ports)
Input
Output
1000 - 2000 MHz
0.5 dB Max
10 dB Min
0.2 dB Max
6° Max
1.7:1 Max
1.4:1 Max
Operating Characteristics
Impedance
50 Ohms Nominal
Maximum Power Rating
or Input Power
1 Watt Max
Internal Load Dissipation
0.1 Watt Max
Environmental
MIL-STD-202 screening available.
Pin Configuration
͚;P5
Output C; P9, Output D; P1
Pins P2, P4, P6 & P8 are ground.
*All specifications apply with 50 ohm source and load impedance.
Ordering Information
Part No.
DS-332
Package
TO-8-2
TO-8-2
DS-332
V2.00
M/A-COM Division of AMP Incorporated s North America: Tel. [phone], Fax [phone] s Asia/Pacific: Tel. [phone], Fax [phone]
s Europe: Tel. [phone], Fax [phone]
www.macom.com
AMP and Connecting at a Higher Level are trademarks.
Specifications subject to change without notice.
6-38