DS-318 Datasheet, PDF (1/1 Pages) Tyco Electronics – Plug-In Two Way Power Divider 5 - 500 MHz

Plug-In Two Way Power Divider
5 - 500 MHz
Features
q Low Cost
q Convenient Plug-In Mounting
Guaranteed Specifications* (From -55°C to +85°C)
Frequency Range
Insertion Loss
(Less coupling)
Isolation
10-200MHz
5-500 MHz
5-500 MHz
0.5 dB Max
1.0 dB Max
18 dB Min
Amplitude Balance
Phase Balance
0.2 dB Max
2° Max
VSWR (All Ports)
1.5:1 Max
RH-1
DS-318
V2.00
Operating Characteristics
Impedance
50 Ohms Nominal
Maximum Power Rating
or Input Power
1 Watt Max
Internal Load DIssipation
0.125 Watts Max
Environmental
MIL-STD-202 screening available.
Pin Configuration
Σ; P1, Outputs P5 & P6
All other pins ground.
* All specifications apply with 50 ohm source and load impedance.
Ordering Information
Model No.
DS-318 PIN
Package
Relay Header
Dimensions in ( ) are in mm.
Unless Otherwise Noted: .xxx = ±0.010 (.xx = ±0.25)
WEIGHT (APPROX.): 0.23 OUNCES 6.5 GRAMS
Typical Performance
INSERTION LOSS
ISOLATION
VSWR
M/A-COM Division of AMP Incorporated s North America: Tel. [phone], Fax [phone] s Asia/Pacific: Tel. [phone], Fax [phone]
s Europe: Tel. [phone], Fax [phone]
www.macom.com
AMP and Connecting at a Higher Level are trademarks.
Specifications subject to change without notice.
6-32