DP12 Datasheet, PDF (1/3 Pages) Tyco Electronics – 12mm Rotary Encoder

12mm Rotary Encoder
Type DP12 Series
Type DP12 Series
12mm Rotary incremental encoder for
use in electronic equipment. Can be
supplied with or without switch with
customisation to standard options.
Characteristics -
Electrical
Pulses:
Contact Rating:
Dielectric Strength:
Insulation Resistance (min):
Operating Speed (RPM):
Switch Power Rating (where fitted):
Switch Contact Resistance:
Electrical Travel:
Rotational Noise:
Chattering:
12 & 24
0.5mA 5VDC
300VAC / 1mA, 1 minute
100M ohms at 250VAC
60 RPM
5VDC, 10mA (1mA Min)
100m ohm Max
Continuous
t2 = 2.0 ms max (see below)
t1 & t3 = 3.0 ms max (see below)
Key Features
■ 12mm Rotary Encoder
■ Incremental Type
■ Push on Switch Option
■ Various Shaft Lengths
■ Pulse Options
■ Detent Options
Code Off area V = 3.5V or more. Code on area V=1.5V or less
Characteristics -
Mechanical
Total Mechanical Travel:
Detents:
Switch Operating Force:
Switch Travel:
Shaft Type:
Shaft Length (from Mounting Surface):
Continuous
0, 12, 24
500+/- 100gf
0.5mm
F – Flatted
17.5, 20, 22.5, 25
Characteristics -
Environmental
Operating Temperature
Rotational Life
-30 ~ +70 degrees C
15,000 Cycles
Output Signal Format
Shaft Rotational
Direction
Signal
Clockwise
A (Terminal A-C)
B (Terminal B-C)
Format
Anticlockwise
A (Terminal A-C)
B (Terminal B-C)
Literature No. 1773449-9
Issued: 02-08
Dimensions are shown for
reference purposes only.
Dimensions are in
millimetres unless
otherwise specified.
Specifications subject to
change.
tycoelectronics.com
passives.tycoelectronics.com