D-436-0186 Datasheet, PDF (1/2 Pages) Tyco Electronics – CUSTOMER DRAWING

CUSTOMER DRAWING
Product
Name
D-436-0184
D-436-0185
D-436-0186
(Note B)
I.D. of Liner
Received Recovered
Min
Max
2.15
(0.085)
4.8
(0.188)
3.05
(0.120)
0.0
(0.00)
0.0
(0.00)
0.0
(0.00)
Weight
Grams
Max
0.3
0.5
0.4
Insulation Sleeve
Recovered Recovered
I.D.
Wall
Max
Min
1.37
0.30
(0.055)
(0.012)
2.41
0.33
(0.095)
(0.013)
1.37
0.30
(0.055)
(0.012)
Product Dimensions
L
E
max
min
21.3
(0.840)
21.7
(0.855)
21.3
(0.8.40)
13.0
(0.510)
13.0
(0.510)
15.25
(0.600)
Note A: This end of sleeve may have a 1.20mm (0.50) opening as received. Upon heating, sealing material will flow
sufficiently to close end.
Note B: D-436-0186 has a blue color code dot
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride.
2. SEALING LINER: Fluorocarbon-based thermoplastic. Color: clear.
APPLICATION
1. These parts are designed for use with Raychem parallel crimp splices to make environment-resistant stub splices in two wires
having a combined insulation diameter less than the “as received” I.D. of the sleeve, and rated for at least +125C.
2. Temperature range: -55C to +150C.
Parts may be installed by convection heating.
TITLE:
SEALING CAPS
Unless otherwise specified dimensions are in
millimeters.
[Inches dimensions are shown in brackets]
Raychem
Devices
DOCUMENT NO.:
D-436-0184/-0186
TOLERANCES: ANGLES: N/A Tyco Electronics reserves the right to
0.00 N/A
amend this drawing at any time. Users
REV:
0.0 N/A
0 N/A
ROUGHNESS
IN MICRON
should evaluate the suitability of the
product for their application.
D
DATE:
September 20, 2011
PREPARED BY:
UNGUYEN
CAGE CODE:
06090
ECO NUMBER:
ECO-11-019172
SCALE:
NTS
SIZE:
A
SHEET:
1 of 1
© 1998-2011 Tyco Electronics Corporation. All rights reserved.
If this document is printed it becomes uncontrolled. Check for the latest revision.