CWT-9001 Datasheet, PDF (1/1 Pages) Tyco Electronics – SOLDERSLEEVE ONE-STEP WIRE TERMINATOR, LOW TEMPERATURE

SPECIFICATION CONTROL DRAWING
Product Revision
Product
Name
CWT-9001 C
CWT-9002 B
CWT-9003 B
CWT-9004 B
CWT-9005 B
Size Code
Color
Items 3
Clear
Red
Blue
Yellow
Grey
Product Dimensions
L
øA
max
min
26.0
1.7
(1.025) (0.065)
42.0
2.7
(1.655) (0.105)
42.0
4.5
(1.655) (0.180)
42.0
6.0
(1.655) (0.235)
42.0
7.0
(1.655) (0.275)
Conductor Dimensions
øB
min
max
0.4
1.7
(0.015) (0.065)
1.3
2.7
(0.050) (0.105)
1.8
4.5
(0.070) (0.180)
2.8
6.0
(0.110) (0.235)
3.2
7.0
(0.125) (0.275)
Selection Guide
Total mm²
Total CMA
min max min max
0.3 0.8 450 1500
0.8 2.0 1250 3500
2.0 4.0 2500 7200
4.0 6.0 6100 19000
6.0 10.0 12000 25000
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, radiation cross-linked modified polyolefin. Transparent clear.
2. SOLDER PREFORM WITH FLUX:
SOLDER: TYPE CD18 per ANSI/J-STD-006.
FLUX: TYPE ROM1 per ANSI/J-STD-004.
3. MELTABLE RINGS: Thermally stabilized thermoplastic. Color: see table.
APPLICATION
1. These controlled soldering devices are designed to splice tin-plated or bare copper stranded wires rated for at least +85C.
2. Temperature range: -55C to +125C.
3. For installation procedure and application equipment consult RPIP-824-00.
For best results, prepare the wires as shown:
TE Connectivity
300 Constitutional Drive
Menlo Park, CA 94025 USA
RAYCHEM
TITLE:
SOLDERSLEEVE ONE-STEP WIRE
TERMINATOR, LOW TEMPERATURE
Unless otherwise specified dimensions are in millimeters.
[Inches dimensions are shown in brackets]
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
TE Connectivity reserves the right to amend
this drawing at any time. Users should evaluate
the suitability of the product for their
application.
DOCUMENT NO.:
PROD. REV.:
SEE TABLE
CWT-900X
DOC. ISSUE: DATE:
10
15-Apr-11
PREPARED BY:
m. foronda
REPLACES:
D981199
DCR NUMBER:
D030072
SCALE:
None
SIZE:
A
SHEET:
1 of 1
Print Date: 9-May-11 If this document is printed it becomes uncontrolled. Check for the latest revision.