CWT-11 Datasheet, PDF (1/1 Pages) Tyco Electronics – SPECIFICATION CONTROL DRAWING

SPECIFICATION CONTROL DRAWING
Product Revisions
Product
Name
CWT-3
D
CWT-5
F
CWT-6
A
CWT-7
F
CWT-9
A
CWT-11
E
CWT-13
A
Product Dimensions
ØA
ØB
L
min
min
max
2.50
3.00
24.5
[0.098] [0.118] [0.965]
4.30
4.80
29.3
[0.170] [0.189] [1.154]
6.00
6.70
32.00
[0.236] [0.264] [1.260]
6.80
7.30
32.50
[0.268] [0.287] [1.280]
8.70
9.20
35.50
[0.343] [0.362] [1.398]
10.80
11.50
35.50
[0.425] [0.453] [1.398]
13.00
15.10
45.50
[0.512] [0.594] [1.791]
ØD
max
3.00
[0.118]
4.80
[0.189]
6.70
[0.264]
7.30
[0.287]
9.20
[0.362]
11.50
[0.453]
15.10
[0.594]
ØE
min
1.50
[0.060]
2.00
[0.079]
3.30
[0.130]
3.30
[0.130]
4.50
[0.177]
4.50
[0.177]
7.00
[0.276]
Prepared Cable Dimensions
ØF
ØG
H
min
max
1.00
[0.040]
2.50
6.0 0.5
[0.098] [0.236±0.020]
1.50
4.30
8.0 0.5
[0.059] [0.170] [0.315±0.020]
2.80
6.00
9.0 0.5
[0.110] [0.236] [0.354±0.020]
2.80
[0.110]
6.80
10.0 1.0
[0.268] [0.394±0.040]
4.00
[0.157]
8.70
11.0 1.0
[0.343] [0.433±0.040]
4.00
[0.157]
10.80
12.0 1.0
[0.425] [0.472±0.040]
6.50
[0.256]
13.00
16.0 1.0
[0.512] [0.630±0.040]
J
7.0 0.5
[0.726±0.020]
9.0 0.5
[0.354±0.020]
10.0 0.5
[0.394±0.020]
11.0 1.0
[0.433±0.040]
12.0 1.0
[0.472±0.040]
13.0 1.0
[0.512±0.040]
17.0 1.0
[0.670±0.040]
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, radiation cross-linked modified polyolefin. Color: transparent clear.
2. SOLDER PREFORM WITH FLUX:
SOLDER: TYPE Cd18 per ANSI/J-STD-006.
FLUX: TYPE ROM1 per ANSI/J-STD-004.
3. MELTABLE SEALING RING: Thermally stabilized thermoplastic. Color: blue (size 3, 5, 6, 7, 9, 11); natural (size 13)
4. MELTABLE SEALING RING: Thermally stabilized thermoplastic. Color: blue (size 3, 5, 7, 11); gray (size 6); natural (size 9, 13)
APPLICATION
1. These controlled soldering devices are designed for termination of a bare or tin-plated copper shield on a cable having an
insulation rated for at least +85C, meeting the dimensional criteria listed in the table above.
2. Temperature range: -55C to +125C.
3. When installed properly, it will meet the requirements of TE Connectivity / Raychem Specification RT-1404.
4. For installation procedure and application equipment consult TE Connectivity / Raychem document RPIP-824-00.
For best results, prepare the cable as shown:
TE Connectivity
300 Constitution Drive,
Menlo Park, CA. 94025, U.S.A.
Raychem
TITLE:
Soldersleeve Shield
Terminator
Unless otherwise specified dimensions are in millimeters.
[Inches dimensions are shown in brackets]
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
TE Connectivity reserves the right to amend
this drawing at any time. Users should evaluate
the suitability of the product for their
application.
DOCUMENT NO.:
PROD. REV.:
See Table
CWT-XX
DOC. ISSUE: DATE:
4
15-Apr-11
PREPARED BY:
mforonda
CAGE CODE :
06090
REPLACES:
D020508
DCR NUMBER:
D040057
SCALE:
---
SIZE:
A
SHEET:
1 of 1
Print Date: 9-May-11
© 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved.
If this document is printed it becomes uncontrolled. Check with the web for the latest revision.