CS250 Datasheet, PDF (1/1 Pages) Tyco Electronics – SPECIFICATION CONTROL DRAWING

SPECIFICATION CONTROL DRAWING
Product Revision
Product
Name
SO63-1-00 E
SO63-2-00 E
SO63-3-00 E
SO63-4-00 E
SO63-5-00 E
Ident.
Code
SO631R
SO632R
SO633R
SO634R
SO635R
L1.75
(L0.07)
16.5
(0.650)
16.5
(0.650)
16.5
(0.650)
19.1
(0.750)
19.1
(0.750)
Product Dimensions
øA
øB
min
min
1.90
2.65
(0.075) (0.105)
2.65
3.68
(0.105) (0.145)
4.30
5.08
(0.170) (0.200)
5.95
6.45
(0.235) (0.255)
7.00
7.60
(0.275) (0.300)
C
min
8.25
(0.325)
8.25
(0.325)
8.25
(0.325)
8.25
(0.325)
8.25
(0.325)
øD
max
1.90
(0.075)
2.65
(0.105)
4.30
(0.170)
5.95
(0.235)
7.00
(0.275)
Cable Dimensions
øE
øF
max
min
2.65
0.90
(0.105) (0.035)
3.68
1.40
(0.145) (0.055)
5.08
2.15
(0.200) (0.085)
6.45
3.30
(0.255) (0.130)
7.60
4.30
(0.300) (0.170)
øG
min
0.50
(0.020)
0.75
(0.030)
1.25
(0.050)
1.80
(0.070)
2.50
(0.100)
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride.
2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR:
SOLDER: TYPE Sn63 per ANSI-J-STD-006.
FLUX:
TYPE ROL1 per ANSI-J-STD-004.
THERMAL INDICATOR: Fusible ring, melt point: 221C.
3. MELTABLE RINGS: Environment resistant thermoplastic. Color: blue.
APPLICATION
1. These parts are designed to provide an environment resistant shield terminations on cables, rated for 125C minimum, meeting the
dimensional criteria listed, having tin or silver plated shields and insulation compatible with the insert material. For compatible
insulations, see MIL-S-83519/1 or consult Raychem.
2. When installed per Raychem process standard RCPS-100-70, assemblies will meet requirements of Raychem Specification
RT-1404 and MIL-S-83519.
3. Temperature range: -55C to +150C.
For best results, prepare
the cable as shown:
* A trademark of TE Connectivity.
TE Connectivity
300 Constitutional Drive
Menlo Park, CA 94025 USA
RAYCHEM
TITLE:
SOLDERSLEEVE* SHIELD
TERMINATOR, IMMERSION RESISTANT
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS.
DOCUMENT NO.: SO63-X-00
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
TE Connectivity reserves the right to amend this
drawing at any time. Users should evaluate the
suitability of the product for their application.
DATE:
16-Apr-11
DOC ISSUE:
7
DRAWN BY:
M. FORONDA
CAGE CODE:
06090
REPLACES:
D981343
DCR NUMBER:
D981964
PROD. REV.:
SEE TABLE
SCALE:
None
SIZE:
A
SHEET:
1 of 1
Print Date: 9-May-11 If this document is printed it becomes uncontrolled. Check for the latest revision