CH-26 Datasheet, PDF (1/1 Pages) Tyco Electronics – CH-26 SPST, 1 Amp, 28 VDC

HARTMAN Aerospace Power Products
DC Current Sensor
CH-26 SPST, 1 Amp, 28 VDC
Features:
• Two Separate Sensors in One Package
• SPST Main Contacts
• Current Operated
• Hermetically Sealed
• 28 VDC
• 1 Amp
• High Reliability
• Meets many requirements of MIL-R-6106
CONTACTOR CONFIGURATION
Dimensions for this product are expressed in inches.
Multiply values by 25.4 for millimeters.
Specification for Complete Unit
Construction
Coil Data Duty Cycle
Minimum Operating Cycles
Environmental Data:
Operating Temperature
Vibration
Weight Maximum
Specifications for Each Relay
Contact Data:
Contacts
Contact Rating
Coil Data:
Pick-Up
Drop-Out
Operating Current:
In-Rush Maximum
PRODUCT SPECIFICATIONS
Two Relays Packaged
Metal Case, Potted Assembly
with Contacts Hermetically Sealed
Continuous (Each Relay)
50,000 (Each Relay)
-55°C to +71°C
20 G to 2000 Hz
8 Oz.
Both Relays the Same
SPST
1 Amp at 28 VDC Lamp Load
0.75 Amp Maximum, 400 Hz
0.10 Amp Minimum, 400 Hz
Continuous Operating Current of 7.5 Amps Max, 400 Hz
37.5 Amps, 400 Hz
Notes:
For factory-direct application assistance, contact the HARTMAN
product team at [phone], Fax [phone].
© 2004 by Tyco Electronics Corporation. All Rights Reserved.
HARTMAN and TYCO are trademarks.
Catalog (web doc only)
Revised 5-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967