CDSUA_11 Datasheet, PDF (1/2 Pages) Tyco Electronics – CDSUA Series

Corcom Facility EMI Filters Product Guide
CDSUA Series
CDSUA Series
Features
• All four current ratings utilize a single housing
(single-wire 30, 60, 100A and two-wire 30A)
• Sealed using 18 AWG steel suitably plated housing
• Removable input cover provides quick access to
terminals
• Three knockouts on the input side
• Discharge bleeder resistor provided to reduce shock
hazard
• Surge protector provided upon request
Electrical Characteristics
Voltage Drop:
Less than 1% @ unity power factor
Overload:
140% of rated current for 15 minutes
Harmonic Distortion:
Less than 2% @ full rated current
Dielectric Withstanding Voltage:
Per MIL-PRF-15733 and UL1283
D.C. Insulation Resistance:
Per MIL-STD-202, Method 302
Terminal Strength:
Per MIL-STD-202, Method 211, Condition E
Current Rating:
Singe-wire 30, 60 and 100A, two-wire 30A
R.F. Radiation:
100 dB minimum shielding effectiveness
Insertion Loss:
100 dB from 100 kHz - 10 GHz per MIL-STD-220A
Operating Frequency:
50/60Hz
Operating Voltage:
Line to Ground:
Line to Line:
277 VAC (max)
480 VAC (max)
Applicable Publications:
UL1283 — UL standard for EMI Filters
How to Order:
CDSUA 2 030 - C - S
Catalog: 1654986
Issue Date: 06.2011
Surge Arrestors (optional)
Conduit Fitting (supplied)
Current Rating
# of Filters
Series
Examples: CDSUA1030-C, CDSUA2030-C-S
20
Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric
USA Cust. Svc.: 1-800-468-2023
equivalents. Dimensions are shown for reference purposes only. Specifications subject to change.
Corcom Prods: 1-847-680-7400
te.com
corcom.com