BE-500G-1 Datasheet, PDF (1/1 Pages) Tyco Electronics – BE-500G-1 3PST N.O., 50 Amps, 120 VAC

HARTMAN Aerospace Power Products
AC Current Sensor
BE-500G-1 3PST N.O., 50 Amps, 120 VAC
Features:
• 3PST N.O. Main Contacts
• Overload Current Sensing
• 120 VAC
• 50 Amps
• High Reliability
• Meets many requirements of MIL-R-6106
Features:
• Overload Current Sensing
CONTACTOR CONFIGURATION
Dimensions for this product are expressed in inches.
Multiply values by 25.4 for millimeters.
PRODUCT SPECIFICATIONS
Construction
Gasket Sealed, Vented
Main Contacts:
Configuration
3PST N.O.
Voltage (Nominal)
120/208 VAC, 400 Hz
Current (Resistive)
50 Amps
Auxiliary Switches:
Configuration
5-SPDT
Voltage (Nominal)
28 VDC
Current
Resistive
5 Amps
Inductive
3 Amps
Lamp
2 Amps
Coil Data:
Duty Cycle
Continuous
Voltage (Nominal)
28 VDC
Pick-Up Voltage
18 VDC Maximum
Drop-Out Voltage
1 - 9 VDC
Coil Current @ 28 VDC & +25°C
In-Rush
3.4 Amps Maximum
Hold
1 Amp Maximum
Operating Temperature
-54°C to +71°C
Life:
Electrical
50,000 Cycles Minimum
Mechanical
100,000 Cycles Minimum
Weight
9 Lb.4 Oz.
Continuous Current
50 Amps
Trip Point - Three Phase
50.5 - 60 Amps
Trip Point - Single Phase
69.0 Amps Max.
Catastrophic Trip
500 Amps ±10%
Notes:
For factory-direct application assistance, contact the HARTMAN
product team at [phone], Fax [phone].
© 2004 by Tyco Electronics Corporation. All Rights Reserved.
HARTMAN and TYCO are trademarks.
Catalog (web doc only)
Revised 5-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967