B-202-81 Datasheet, PDF (1/1 Pages) Tyco Electronics – COAXIAL CABLE SPLICE KIT

SPECIFICATION CONTROL DRAWING
MATERIAL
1. INSULATION SLEEVE: Heat-shrinkable, radiation cross-linked modified polyolefin. Transparent clear.
2. SOLDERSHIELD DEVICE: Tin plated copper braid with flux.
3. DIELECTRIC BARRIER: Cross-linked polyvinylidene fluoride. Color: yellow.
4. INSULATION SLEEVE: Heat-shrinkable, radiation cross-linked modified polyvinylidene fluoride. Transparent blue.
5. SOLDER PREFORM WITH FLUX:
SOLDER: TYPE Sn63 per ANSI J-STD-006.
FLUX: TYPE ROL1 per ANSI J-STD-004.
6. INSULATION TUBING: Precoated, radiation cross-linked modified polyolefin with adhesive. Color: black.
APPLICATION
1. This controlled soldering device is designed to splice the center conductor and the braid, both made of bare tin or silver plated
copper, of coaxial cables having an insulation temperature rated for at least +85°C. The product is suitable for single or double
braided cables.
2. Temperature range: -55°C to +125°C.
3. For installation procedure: See RPIP-699-00.
Cable Dimensions:
*A trademark of Tyco Corporation.
Tyco Electronics Corporation
305 Constitutional Drive
Menlo Park, CA 94025 USA
RAYCHEM
Products
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
TITLE:
COAXIAL CABLE SPLICE KIT
DOCUMENT NO.: B-202-81
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Tyco reserves the right to amend this drawing at any
time. Users should evaluate the suitability of the
product for their application.
DATE:
Sept. 17, 1998
DRAWN BY:
R. MAPALO
REPLACES:
B20281
DCR NUMBER:
D981685
PROD. REV.:
A
SCALE:
NONE
If this document is printed it becomes uncontrolled. Check for the latest revision.
DOC ISSUE:
2
SIZE:
A
SHEET:
1 of 1