AT90-0106 Datasheet, PDF (1/6 Pages) Tyco Electronics – Digital Attenuator, 50 dB, 6-Bit, TTL Driver, DC-2.4 GHz

Digital Attenuator, 50 dB, 6-Bit,
TTL Driver, DC-2.4 GHz
V 5.00
Features
n Attenuation: 1 dB Steps to 50 dB
n Low DC Power Consumption
n Small Footprint, JEDEC Package
n Integral TTL Driver
n 50 ohm Impedance
n Test Boards are Available
n Tape and Reel Packaging Available
CSP-1
Description
M/A-COM's AT90-0106 is a GaAs FET 6-bit digital
attenuator with integral TTL driver. Step size is 1 dB pro-
viding a 50 dB total attenuation range. This device is in a
FQFP-N plastic surface mount package. The AT90-0106 is
ideally suited for use where accuracy, fast speed, very low
power consumption and low costs are required.
Electrical Specifications T_A = +25°C
Parameter
Test Conditions
Frequency Units Min Typical
Max
Insertion Loss
—
DC - 2.4 GHz dB
—
Attenuation
Individual Bits 1-2-4-8-16-32 dB DC - 2.4 GHz dB
—
Accuracy
Any Combination of Bits
DC - 2.4 GHz dB
—
1 to 50 dB
VSWR
Full Range
DC - 2.4 GHz Ratio
—
Switching Speed
50% Cntl to 90%/10% RF
—
nS
—
10% to 90% or 90% to 10%
—
nS
—
1 dB Compression
—
50 MHz
dBm
—
—
0.5 - 2.40 GHz dBm
—
Input IP₃
Two-tone inputs up to +5 dBm
50 MHz
dB
—
0.5-2.4 GHz
dB
—
+Vcc
-Vee
—
—
V
4.75
—
—
V
-8.0
Logic “0”
Sink Current is 20 µA max.
—
V
0.0
5.5
6.0
— ±(.3 +5% of atten setting)
— ±(.5 +8% of atten setting)
1.8:1
75
20
+21
+29
+35
+48
5.0
-5.0
—
2:1
150
50
—
—
—
—
5.25
-4.75
0.8
Logic “1”
Source Current is 20 µA max.
—
V
2.0
—
5.0
Icc
Vcc min to max,
—
mA
—
0.2
6
Logic “0” or “1”
-Iee
-Vee min to max,
—
mA
—
-0.2
-1
Logic “0” or “1”