AT65-0283 Datasheet, PDF (1/3 Pages) Tyco Electronics – Digital Attenuator, 15.5 dB, 5-Bit, TTL Driver, DC - 2.0 GHz

Digital Attenuator, 15.5 dB, 5-Bit,
TTL Driver, DC - 2.0 GHz
V 6.00
Features
n Attenuation: 0.5 dB Steps to 15.5 dB
n Low DC Power Consumption
n Plastic SOIC, Wide Body, SMT Package
n Integral TTL Driver
n 50 ohm Impedance
n Test Boards are Available
n Tape and Reel Packaging Available
SOW-16
Description
M/A-COM's AT65-0283 is a GaAs FET 5-bit digital
attenuator with integral TTL driver. Step size is 0.5 dB
providing a 15.5 dB total attenuation range. This device is
in a SOIC-16 plastic surface mount package. The
AT65-0283 is ideally suited for use where accuracy, fast
speed, very low power consumption and low costs are
required.
Package outline conforms to JEDEC standard MS-013AA.
Electrical Specifications: T_A = 25°C
Parameter
Insertion Loss
Test Conditions
—
Attenuation Accuracy
VSWR
Switching Speed ¹
Any Bit
Any Combination of Bits
Full Range
50% Cntl to 90%/10% RF
10% to 90% or 90% to 10%
Frequency
DC - 1.0 GHz
DC - 2.0 GHz
DC - 2.0 GHz
DC -2.0 GHz
DC - 2.0 GHz
—
—
1 dB Compression
Input IP₃
Vcc
-Vee
Logic “0”
Logic “1”
Icc
-Iee
—
—
Two-tone inputs up to +5 dBm
—
—
Sink Current is 20 µA max.
50 MHz
0.5 - 2.0 GHz
50 MHz
0.5-2.0 GHz
—
—
—
Source Current is 20 µA max.
—
Vcc min to max, Logic “0” or “1”
—
-Iee min to max, Logic “0” or “1”
—
Units
dB
dB
dB
dB
Ratio
nS
nS
dBm
dBm
dB
dB
V
V
V
V
mA
mA
1. Decoupling capacitors (.01 µF) are required on power supply lines.
Min Typical
Max
—
2.0
2.5
—
2.3
2.7
—
—
±(.3 +4% of atten)
—
—
± (.3 +6% of atten)
—
1.5:1
1.8:1
—
75
150
—
20
50
—
+21
—
+29
—
+35
—
+48
4.75
5.0
-8.0
-5.0
0.0
—
2.0
—
—
0.2
—
-0.2
—
—
—
—
5.25
-4.75
0.8
5.0
6
-1