AT-264 Datasheet, PDF (1/2 Pages) Tyco Electronics – Digital Attenuator, 4 Bit, Single Control 30 dB, 0.5 - 2.0 GHz

Digital Attenuator, 4 Bit, Single Control, 30 dB, 0.5 - 2.0 GHz
AT-264
AT-264
Digital Attenuator, 4 Bit, Single Control
30 dB, 0.5 - 2.0 GHz
Features
• Single Control CMOS logic for each bit
• Attenuation 2 dB steps to 30 dB
• Low DC Power Consumtion: 50 uW
• Low Cost Plastic TSSOP-16 Package
Description
The M/A-COM AT-264 is a 4 bit, 2 dB step GaAs MMIC
digital attenuator in a low cost TSSOP-16 surface mount plastic
package. The AT-264 is ideally suited for use where high
accuracy, very low power consumption and low intermodula-
tion products are required. Typical applications include radio,
cellular, wireless LANs, GPS equipment and other gain/level
control circuits.
The AT-264 is fabricated using a mature 1 micron GaAs
MESFET process. The process features full chip passivation
for increased performance and reliability.
TSSOP-16¹
PN 16
25
.03
24
03
6,0
0,9
6,2
0,8
PN 1
.17
.16
.025
4,0
0,6
4,2
20
19
5,1
4,0
1. Dimensions are in inches/mm.
Ordering Information
Part Number
Package
AT-264
AT-264TR
TSSOP 16-Lead Plastic
Tape and Reel¹
1. Refer to Application Note M513 for reel size information.
Electrical Specifications: T_A = +25°C¹
Parameter
Reference Insertion Loss
Attenuation Accuracy
VSWR
T_rise, T_fall
T_on, T_off
Transients
Test Conditions
0.5 - 1.0 GHz
0.5 - 2.0 GHz
0.5 - 1.0 GHz
0.5 - 2.0 GHz
1.0 - 1.5 GHz
0.5 - 2.0 GHz
10% to 90% RF, 90% to 10% RF
50% Control to 90% RF, 50% Control to 10% RF
in Band
1 dB Compression
IP₂
IP₃
Input Power
Input Power
Measured Relative to
Input Power²
Measured Relative to
Input Power²
0.5 GHz
0.9 GHz
0.5 GHz
0.5 - 2.0 GHz
0.5 GHz
0.5 - 2.0 GHz
Units Min.
Typ.
Max.
dB
1.6
1.8
dB
1.8
2.0
±(0.15 dB + 5% of Attenuation setting in dB) dB
±(0.3 dB + 5% of Attenuation setting in dB) dB
1.5:1
1.9:1
µS
3
µS
3
mV
75
dBm
25
dBm
25
dBm
65
dBm
71
dBm
43
dBm
47
1. All measurements at 900 MHz in a 50Ω system unless otherwise specified. Loss varies at 0.003 dB/°C.
2. For two-tone Input Power up to +5 dBm.
M/A-COM Division of AMP Incorporated 3 North America: Tel. [phone], Fax [phone] Asia/Pacific: Tel.[phone], Fax [phone]
3 Europe: Tel. [phone], Fax[phone]
www.macom.com
AMP and Connecting at a Higher Level are trademarks.
Specifications subject to change without notice.
V3.00