AT-110-2 Datasheet, PDF (1/3 Pages) Tyco Electronics – Voltage Variable Absorptive Attenuator, 30dB 0.5 - 2.0 GHz

Voltage Variable Absorptive Attenuator
30 dB, 0.5-2.0 GHz
Features
• Single Positive Voltage Control: 0 to +5 Volts
• 30 dB Voltage Variable Attenuation
• ± 2 dB Linearity from BSL
• Low DC Power Consumption
• Temperature Range: -40°C to +85°C
• SOIC-8 Plastic Package
• Tape and Reel Packaging Available
• Fast Switching Speed
Description
M/A-COM’s AT-110-2 is a GaAs MMIC voltage
variable absorptive attenuator in a low-cost SOIC 8-
lead surface mount plastic package. The AT-110-2
has a faster switching speed than the AT-108 or
AT-109. The AT-110-2 is ideally suited for use where
linear attenuation fine tuning and very low power
consumption are required.
Typical applications include radio, cellular, GPS
equipment and automatic gain/level control circuits.
The AT-110-2 is fabricated with a monolithic GaAs
MMIC using a mature 1-micron process. The
process features full chip passivation for increased
performance and reliability.
Ordering Information
Part Number
AT-110-2
AT-110-2TR
Package
SOIC 8-Lead Plastic Package
Forward Tape and Reel
Note: Reference Application Note M513 for reel size
information.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
Functional Schematic ^1,2,3
AT-110-2
V1
8
7
6
5
1
2
3
4
1. V_CC = +5 VDC ± 0.5 VDC @ 300 µA maximum.
2. V_C = 0 VDC to +5 VDC @ 6 mA maximum.
3. External DC blocking capacitors are required on all RF ports.
Pin Configuration
Pin No.
1
2
3
4
Function
Ground
Ground
RF Port
V_CC
Pin No.
5
6
7
8
Function
V_C
Ground
RF Port
Ground
Absolute Maximum Ratings ^4,5
Parameter
Absolute Maximum
Input Power
+21 dBm
Supply Voltage V_CC
Control Voltage V_C
-1 V < V_CC < +8 V
-1 V < V_C < V_CC + 0.5 V
Operating Temperature
-40°C to +85°C
Storage Temperature
-65°C to +150°C
4. Exceeding any one or combination of these limits may cause
permanent damage to this device.
5. M/A-COM does not recommend sustained operation near
these survivability limits.
• North America Tel: [phone] / Fax: [phone]
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macom.com for additional data sheets and product information.