ASMD030F-2 Datasheet, PDF (1/1 Pages) Tyco Electronics – Specification Status: Released

308 Constitution Drive
Menlo Park, CA 94025-1164
Phone: [phone]
www.circuitprotection.com
PolySwitch®
PTC Devices
Overcurrent Protection Device
PRODUCT: ASMD030F
DOCUMENT: SCD26566
REV LETTER: E
REV DATE: MAY 12, 2011
PAGE NO.: 1 OF 1
Specification Status: Released
Maximum Electrical Ratings
Operating Voltage / Interrupt Current
60V_DC / 10A
12V_DC / 60A
5V_DC / 125A
Marking:
Notes:
1. All metal surfaces are tin plated.
2. Devices cannot be wave soldered.
3. Drawing not to scale.
TABLE I. DIMENSIONS:
A
B
MIN MAX MIN MAX
mm: 6.73 7.98 -- 3.18
in*: (0.265) (0.314) -- (0.125)
C
D
E
F
G
H
MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN
4.8 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43
(0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017)
TABLE II. PERFORMANCE RATINGS:
CURRENT RATINGS**
AMPS
AT 0°C
HOLD TRIP
0.27 0.69
AMPS
AT 20°C
HOLD TRIP
0.23 0.59
AMPS
AT 60°C
HOLD TRIP
0.15 0.38
TIME TO
TRIP**
SECONDS AT
25°C, 1.15A
MAX
12
RESISTANCE
VALUES
OHMS
AT 25°C
MIN MAX*
0.98 4.8
TRIPPED-STATE
POWER
DISSIPATION**
WATTS AT
25°C
TYP.
1.1
* Maximum resistance is measured 1 hour after reflow.
** Values specified were determined using PCB’s with 0.120”X2.0 ounce copper traces.
Reference Documents:
Precedence:
Effectivity:
CAUTION:
PS300, PS400
This specification takes precedence over documents referenced herein.
Reference documents shall be the issue in effect on the date of invitation for bid.
Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.
Materials Information
ROHS Compliant
ELV Compliant
Pb-Free
Halogen Free*
* Halogen Free refers to: Br≤900ppm, Cl≤900ppm, Br+Cl≤1500ppm
HF
© 2006, 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All rights reserved.