AM50-0002V7 Datasheet, PDF (1/5 Pages) Tyco Electronics – Low Noise Amplifier

Low Noise Amplifier
1.575 GHz
Features
• Low Noise Figure: 1.15 dB
• High Gain: 27 dB
• Low Power Consumption: 5V, 20 mA
• High Dynamic Range
• Low Cost SOIC-8 Lead Package
Description
M/A-COM’s AM50-0002 is a high performance GaAs
MMIC low noise amplifier in a low cost SOIC 8 Lead
surface mount plastic package. The AM50-0002
employs a monolithic 3-stage self-bias design and a
simple external matching network to obtain minimum
noise figure.
The AM50-0002 is ideally suited for use where low
noise figure, high gain, high dynamic range and low
power consumption are required. Typical
applications include receiver front ends in the Global
Positioning System (GPS) market, as well as
standard gain blocks, buffer amps, driver amps, and
IF amps in both fixed and portable systems.
M/A-COM’S AM50-0002 is fabricated using a mature
0.5-micron gate length GaAs process. The process
features full passivation for increased performance
reliability.
Ordering Information
Part Number
AM50-0002
Package
SOIC-8 Lead Package
AM50-0002TR
Forward Tape and Reel, 1000 pcs
AM50-0002TR-3000 Forward Tape and Reel, 3000 pcs
AM50-0002SMB Sample Test Board (Includes 5 Samples)
Note: Reference Application Note M513 for reel size
information.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
Functional Diagram
GND
RF IN
AM50-0002
V7
GND
GND
GND
GND
RF OUT
GND
Pin Configuration
PIN No.
PIN Name
Description
1
GND
Ground
2
RF_IN
RF Input
3
GND
Ground
4
GND
Ground
5
GND
Ground
6
RF_OUT
7
GND
RF Output, V_DD
Ground
8
GND
Ground
1. Pins 1, 3, 4, 5, 7, and 8 must be RF and DC grounded as
shown.
2. Pin 2 is the RF input and must be connected to the simple
matching network shown.
3. Pin 6 is the RF output, V_DD is also applied on Pin 6.
Absolute Maximum Ratings⁴
Parameter
VDD
Input Power
Channel Temperature ²
Operating Temperature
Storage Temperature
Absolute Maximum
+10 VDC
17 dBm
+150 °C
-40 °C to +85 °C
-65 °C to +150 °C
4. Exceeding any one or combination of these limits may cause
permanent damage to this device.
5. Typical thermal resistance (θjc) = +165 °C/W
• North America Tel: [phone] / Fax: [phone]
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macom.com for additional data sheets and product information.