AM-AMC-145 Datasheet, PDF (1/3 Pages) Tyco Electronics – High Performance Amplifier, 11dB Gain 10 - 1000 MHz

High Performance Amplifier,
11 dB Gain, 10 - 1000 MHz
Features
n 2.5 dB Typical Midband Noise Figure
n +19 dBm Typical Midband Output Power
n +37 dBm Typical Midband Third Order Intercept
Description
M/A-COM’s AM-145 is a coupler feedback amplifier with
high intercept and compression points. The use of coupler
feedback minimizes noise figure and current in a high
intercept amplifier. This amplifier is packaged in a TO-8
package. Due to the internal power dissipation the thermal
rise minimized. The ground plane on the PC board should
be configured to remove heat from under the package.
AM-145 are ideally suited for use where a high intercept,
high reliability amplifier is required.
TO-8-1
C-32
V 3.00
Absolute Maximum Ratings ¹
Parameter
Absolute Maximum
Max. Input Power
+10 dBm
V_bias
Operating Temperature
+15.75 V
-55°C to +85°C
Storage Temperature
-65°C to +125°C
1. Operation of this device above any one of these
parameters may cause permanent damage.