AM-AMC-142 Datasheet, PDF (1/3 Pages) Tyco Electronics – Low Noise Amplifier, 12 dB Gain, 200 - 1000 MHz

Low Noise Amplifier, 12 dB Gain,
200 - 1000 MHz
V 3.00
Features
n 2.2 dB Typical Midband Noise Figure
n +6 dBm Typical Midband Output Power
n +20 dBm Typical Midband Third Order Intercept
Description
M/A-COM’s AM-142 is a coupler feedback amplifier with
low noise figure and high intercept points for the low bias
current. The use of coupler feedback minimizes noise figure
and current in a high intercept amplifier. This amplifier is
packaged in a TO-8 package. The ground plane on the PC
board should be configured to remove heat from under the
package. AM-142 are ideally suited for use where a low
noise, high reliability amplifier is required.
TO-8-1
C-32
Absolute Maximum Ratings ¹
Parameter
Absolute Maximum
Max. Input Power
+20 dBm
V_bias
Operating Temperature
+15.75 V
-55°C to +85°C
Storage Temperature
-65°C to +125°C
1. Operation of this device above any one of these
parameters may cause permanent damage.