AHS080-2018 Datasheet, PDF (1/1 Pages) Tyco Electronics – Overcurrent Protection Device

308 Constitution Drive
Menlo Park, CA 94025-1164
Phone: [phone]
www.circuitprotection.com
PolySwitch®
PTC Devices
Overcurrent Protection Device
Raychem Circuit Protection Products
PRODUCT: AHS080-2018
DOCUMENT: SCD 24509
REV LETTER: F
REV DATE: APRIL 10, 2008
PAGE NO.: 1 OF 1
Specification Status: Released
Maximum Electrical Ratings
Operating Voltage / Interrupt Current
16Vdc / 70A
C
Marking:
F
H08
B
Manufacturer’s Mark
Part Identification
Notes:
1. All metal surfaces are tin plated.
2. Devices cannot be wave soldered.
3. Drawing not to scale.
D
E
A
TABLE I. DIMENSIONS:
A
B
C
D
E
F
MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX
mm: 4.72 5.44 --
1.52 4.22 4.93 0.25 0.36 0.25 0.36 0.30 0.46
in*: (0.186) (0.214) -- (0.060) (0.166) (0.194) (0.010) (0.014) (0.010) (0.014) (0.012) (0.018)
TABLE II. PERFORMANCE RATINGS:
CURRENT RATINGS**
HOLD
0.80
AMPS
AT 20°C
TRIP
2.00
TIME TO
TRIP**
SECONDS AT
20°C, 8.0A
MAX
9.0
RESISTANCE
VALUES
OHMS
AT 20°C
MIN MAX*
0.130 0.550
TRIPPED-STATE
POWER
DISSIPATION**
WATTS AT
20°C
TYP.
1.5
* Maximum resistance is measured 1 hour after reflow
** Values specified were determined using PCB’s with 0.120”X2.0 ounce copper traces.
Reference Documents:
Precedence:
Effectivity:
CAUTION:
PS400, PS300
This specification takes precedence over documents referenced herein.
Reference documents shall be the issue in effect on the date of invitation for bid.
Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.
Materials Information
ROHS Compliant
ELV Compliant
Pb-Free
© 2002, 2008 Tyco Electronics Corporation. All rights reserved.