English
Language : 

A80 Datasheet, PDF (1/2 Pages) Tyco Electronics – Cascadable Amplifier 20 to 500 MHz
Cascadable Amplifier
20 to 500 MHz
A80/ SMA80
V2
Features
• HIGH REVERSE ISOLATION 39 dB (TYP.)
• VERY LOW NOISE 2.3 dB (TYP.)
• HIGH GAIN 29 dB (TYP.)
• MEDIUM LEVEL OUTPUT +14.3 dBm (TYP.)
Description
The A80 RF amplifier is a discrete hybrid design, which uses
thin film manufacturing processes for accurate performance
and high reliability.
The 2 stage silicon bipolar feedback amplifier design displays
impressive performance over a broadband frequency range.
An isolation transformer is used in the feedback loop, with the
benefit of high reverse isolation.
Both TO-8 and Surface Mount packages are hermetically
sealed, and MIL-STD-883 environmental screening is available.
Ordering Information
Product Image
Part Number
A80
SMA80
CA80
Package
TO-8
Surface Mount
SMA Connectorized
Electrical Specifications: Z0 = 50Ω, VCC = +15 VDC
Absolute Maximum Ratings
Parameter
Frequency
Small Signal Gain (min)
Gain Flatness (max)
Reverse Isolation
Noise Figure (max)
Power Output
@ 1 dB comp. (min)
IP3
Units
MHz
dB
dB
dB
dB
dBm
dBm
Typical
25ºC
10-550
29.0
±0.3
39
2.3
14.3
+27
Guaranteed
0º to 50ºC -54º to +85ºC*
20-500
20-500
27.5
26.5
±0.7
±1.0
3.0
3.4
13.0
12.5
Parameter
Absolute
Maximum
Storage Temperature -62ºC to +125ºC
Case Temperature
125ºC
DC Voltage
+17 V
Continuous Input Power
+6 dBm
Short Term Input power
(1 minute max.)
50 mW
Peak Power (3 µsec max.)
0.5 W
“S” Series Burn-In
Temperature (case)
125ºC
Thermal Data: VCC = +15 VDC
IP2
dBm
+33
Parameter
Rating
Second Order Harmonic IP dBm
+40
VSWR Input / Output (max)
1.4:1 / 1.8:1 1.8:1 / 2.1:1
DC Current @ 15 Volts (max) mA
45
49
2.0:1 / 2.3:1
52
Thermal Resistance θjc
Transistor Power Dissipation Pd
Junction Temperature Rise
Above Case Tjc
45ºC/W
0.27 W
12.2ºC
* Over temperature performance limits for part number CA80, guaranteed from 0oC to +50oC only.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
• North America Tel: 800.366.2266 / Fax: 978.366.2266
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
whatsoever arising out of the use or application of any product(s) or
information.
Visit www.macom.com for additional data sheets and product information.