A411 Datasheet, PDF (1/1 Pages) Tyco Electronics – 10 TO 400 MHz CASCADABLE AMPLIFIER

A411/SMA411
10 TO 400 MHz
CASCADABLE AMPLIFIER
· LOW NOISE FIGURE: 3.0 dB (TYP.)
· HIGH EFFICIENCY: 16 mA at +5 Vdc
· HIGH THIRD ORDER I.P.: +29 dBm at +8 Vdc (TYP.)
· MEDIUM OUTPUT LEVEL: +14.5 dBm at +8 Vdc (TYP.)
Typical Performance @ 25°C
Specifications (Rev. Date: 6/01)*
Characteristics
Frequency
Small Signal Gain (min.)
Gain Flatness (max.)
Reverse Isolation
Noise Figure (max.)
Power Output @ 1 dB comp. (min.)
IP3
IP2
Second Order Harmonic IP
VSWR Input / Output (max.)
DC Current @ 5 Volts (max.)
Typical
5-450 MHz
15.8 dB
±0.3 dB
20 dB
3.0 dB
10.0 dBm
+24 dBm
+32 dBm
+39 dBm
1.5:1 / 1.5:1
16 mA
Guaranteed
0° to 50°C -54° to +85°C
10-400 MHz 10-400 MHz
15.0 dB
14.5 dB
±0.5 dB
±0.8 dB
3.5 dB
9.0 dBm
4.0 dB
8.5 dBm
1.8:1 / 1.8:1 2.0:1 / 2.0:1
18 mA
20 mA
* Measured in a 50-ohm system at +5 Vdc Nominal. Subject to change without notice.
Absolute Maximum Ratings
Storage Temperature
Max. Case Temperature
Max. DC Voltage
Max. Continuous RF Input Power
Max. Short Term RF Input Power (1 minute max.)
Max. Peak Power (3 µsec max.)
“S” Series Burn-in Temperature (Case)
-62° to +125°C
125°C
+10 Volts
+13 dBm
50 mW
0.5 W
125°C
Thermal Data: V_cc = 5 Vdc
Thermal Resistance θ_jc
Transistor Power Dissipation P_d
Junction Temperature Rise Above Case T_jc
184°C/W
0.059 W
11°C
Outline Drawings
Package
Figure
Model
TO-8
BG
A411
Surface Mount
AA
SMA411
SMA Connectorized
CE
CA411
Specifications subject to change without notice. • North America: 1-800-366-2266
Visit www.macom.com for complete contact and product information.