English
Language : 

A32_1 Datasheet, PDF (1/2 Pages) Tyco Electronics – Cascadable Amplifier 100 to 2000 MHz
Cascadable Amplifier
100 to 2000 MHz
A32/ SMA32
V4
Features
• LOW NOISE FIGURE: 3.5 dB (TYP.)
• HIGH THIRD ORDER IP: +32 dBm (TYP.)
• HIGH OUTPUT LEVEL: +21 dBm (TYP.)
• LOW VSWR: 1.8:1 (TYP.)
Description
The A32 RF amplifier is a discrete hybrid design, which uses
thin film manufacturing processes for accurate performance
and high reliability.
This single stage GaAs FET feedback amplifier design displays
impressive performance characteristics over a broadband
frequency range. An RF choke is used for DC power supply
decoupling.
Both TO-8 and Surface Mount packages are hermetically
sealed, and MIL-STD-883 environmental screening is available.
Ordering Information
Product Image
Part Number
A32
SMA32
CA32
Package
TO-8
Surface Mount
SMA Connectorized
Electrical Specifications: Z0 = 50Ω, VCC = +15 VDC
Absolute Maximum Ratings
Parameter
Units
Typical
25ºC
Guaranteed
0º to 50ºC -54º to +85ºC*
Frequency
MHz 10-2000
10-2000
10-2000
Small Signal Gain (min)
dB
10.0
9.0
8.5
Gain Flatness (max)
dB
±3.0
±0.7
±1.0
Reverse Isolation
dB
20
Noise Figure (max)
dB
3.5
4.0
4.5
Power Output
@ 1 dB comp. (min)
dBm
21.0
19.0
18.0
IP3
dBm
+32
IP2
dBm
+38
Second Order Harmonic IP dBm
+40
VSWR Input / Output (max)
1.8:1 / 1.8:1 2.1:1 / 2.1:1 2.3:1 / 2.3:1
DC Current @ 15 Volts (max) mA
94
98
100
Parameter
Absolute
Maximum
Storage Temperature -62ºC to +125ºC
Case Temperature
+125ºC
DC Voltage
+17 V
Continuous Input Power
13 dBm
Short Term Input power
(1 minute max.)
50 mW
Peak Power (3 µsec max.)
0.5 W
“S” Series Burn-In
Temperature (case)
+125ºC
Thermal Data: VCC = +15 VDC
Parameter
Rating
Thermal Resistance θjc
Transistor Power Dissipation Pd
Junction Temperature Rise
Above Case Tjc
182ºC/W
0.288 W
+52ºC
* Over temperature performance limits for part number CA32, guaranteed from 0oC to +50oC only.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
• North America Tel: 800.366.2266 / Fax: 978.366.2266
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
whatsoever arising out of the use or application of any product(s) or
information.
Visit www.macom.com for additional data sheets and product information.