English
Language : 

A16-2 Datasheet, PDF (1/2 Pages) Tyco Electronics – Cascadable Amplifier 10 to 1200 MHz
Cascadable Amplifier
10 to 1200 MHz
A16-2/ SMA16-2
V2
Features
Product Image
• LOW NOISE: 3.5 dB (TYP.)
• HIGH EFFICIENCY: 15 mA (TYP.) @ +5 Volts
• GOOD DYNAMIC RANGE: 102.5 dB (TYP.) in 1 MHz BW
• LOW VSWR: <1.5:1 (TYP.)
Description
The A16-2 RF amplifier is a discrete thin film hybrid design, which
incorporates the use of thin film manufacturing processes for
accurate performance and high reliability.
This single stage bipolar transistor feedback amplifier design
displays impressive performance over a broadband frequency range.
An active DC biasing network is used for temperature-stable
performance, in addition to an RF Choke, used for power supply
decoupling.
Both TO-8 and Surface Mount packages are hermetically sealed,
and MIL-STD-883 environmental screening is available.
Ordering Information
Part Number
A16-2
SMA16-2
CA16-2
Package
TO-8
Surface Mount
SMA Connectorized
Electrical Specifications: Z0 = 50Ω, VCC = +15 VDC
Absolute Maximum Ratings
Parameter
Frequency
Small Signal Gain (min)
Gain Flatness (max)
Reverse Isolation
Noise Figure (max)
Power Output
@ 1 dB comp. (min)
Units
Typical
25ºC
MHz
5-1300
dB
13.0
dB
±0.2
dB
16
dB
3.5
dBm
6.0
Guaranteed
0º to 50ºC -54º to +85ºC*
10-1200
10-1200
12.0
11.5
±0.5
±0.7
4.0
4.5
5.0
4.5
Parameter
Absolute
Maximum
Storage Temperature -62ºC to +125ºC
Case Temperature
+125ºC
DC Voltage
+8 V
Continuous Input Power
+13 dBm
Short Term Input power
(1 minute max.)
50 mW
Peak Power (3 µsec max.)
0.5 W
“S” Series Burn-In
Temperature (case)
+125ºC
IP3
dBm
+18
IP2
dBm
+28
Second Order Harmonic IP dBm
+34
VSWR Input / Output (max)
1.5:1 / 1.5:1 1.9:1 / 1.9:1
DC Current @ 15 Volts (max) mA
15
17
2.0:1 / 2.0:1
18
Thermal Data: VCC = +15 VDC
Parameter
Thermal Resistance θjc
Transistor Power Dissipation Pd
Junction Temperature Rise
Above Case Tjc
Rating
45ºC/W
0.051 W
+2ºC
* Over temperature performance limits for part number CA16-2, guaranteed from 0oC to +50oC only.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
whatsoever arising out of the use or application of any product(s) or
information.
Visit www.macom.com for additional data sheets and product information.