A-701P-3 Datasheet, PDF (1/1 Pages) Tyco Electronics – A-701P-3 SPST N.O., 500 Amps, 28 VDC

HARTMAN Aerospace Power Products
DC Current Sensor
A-701P-3 SPST N.O., 500 Amps, 28 VDC
Features:
• SPST N.O. Main Contacts
• Remote Reset
• 28 VDC
• 500 Amps
• High Reliability
• Meets many requirements of MIL-R-6106
CONTACTOR CONFIGURATION
Dimensions for this product are expressed in inches.
Multiply values by 25.4 for millimeters.
PRODUCT SPECIFICATIONS
Construction
Gasket Sealed, Vented
Main Contacts:
Configuration
SPST N.O.
Voltage (Nominal)
28 VDC
Current (Resistive)
500 Amps for 90 Seconds; 1500 Amps In-Rush
Auxiliary Contacts:
Configuration
SPDT
Voltage (Nominal)
28 VDC
Current
Resistive
5 Amps
Inductive
3 Amps
Coil Data:
Duty Cycle
Intermittent
Voltage (Nominal)
28 VDC
Pick-Up Voltage
12 VDC Maximum
Drop-Out Voltage
0.5 - 5 VDC
Coil Current @ 28 VDC & +25°C
In-Rush
2 Amps
Hold
2 Amps
Operating Temperature
-55°C to +71°C
Life:
Electrical
25,000 Cycles
Mechanical
100,000 Cycles
Weight
3 Lbs. 8 Oz.
Additional Information: Current Trip Point – 400 Amps ±10%
Reset is achieved by momentarily removing SW voltage.
Consult Hartman for Detailed Theory of Operation.
Notes:
For factory-direct application assistance, contact the HARTMAN
product team at [phone], Fax [phone].
© 2004 by Tyco Electronics Corporation. All Rights Reserved.
HARTMAN and TYCO are trademarks.
Catalog (web doc only)
Revised 5-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967