6VN1_11 Datasheet, PDF (1/2 Pages) Tyco Electronics – High Performance RFI Filters for Switching Power Supplies

N Series
Corcom Product Guide
Catalog: 1654001
Issue Date: 06.2011
High Performance RFI Filters for Switching Power Supplies
UL Recognized
CSA Certified
VDE Approved
6VN1
10VN1
N Series
• Superior attenuation for most digital electronic
equipment over the frequency range of 10kHz to
30MHz
• Provides excellent common mode and differential
mode performance
• Cost-effective solution to very noisy equipment
that must meet conducted emission limits
Ordering Information
10 V N 1
Input / Output Style
1 – .250 [6.3] spade terminals
Specifications
Maximum leakage current each Line to Ground:
@ 120 VAC 60 Hz:
1.2 mA
@250 VAC 50 Hz:
2.0 mA
Hipot rating (one minute):
Line to Ground:
Line to Line:
2250 VDC
1450 VDC
Rated Voltage (max):
250 VAC
Operating Frequency:
50/60 Hz
Rated Current:
6 to 10A
Operating Ambient Temperature Range
(at rated current Ir):
-10°C to +40°C
In an ambient temperature (Ta) higher than +40°C
the
maximum
operating
current (Io)
follows: Io
is calculated as
= Ir (85-Ta)/45
Electrical Schematics
3VN
N Series
Leakage current designation
V – Standard
LINE
LOAD
Current Rating
6 or 10A
Available Part Numbers
6VN1
10VN1
10VN
LINE
LOAD
56
Dimensions are in inches and millimeters unless otherwise specified. Values in italics
are metric equivalents. Dimensions are shown for reference purposes only.
Specifications subject to change.
For email, phone or live chat, please go to
te.com/help
corcom.com