62403-1 Datasheet, PDF (1/5 Pages) Tyco Electronics – Axial Leaded Power Inductors

Key Features
I Wide Inductance Range
I Insulated Packaging
I Four Sizes
I Flame Retardant
I Wide Temperature Range
I Established Reliability
I Fully Protected from the
Environment
I Available from
Distribution
Axial Leaded Power Inductors
Type SC10, SC15, SC30, SC55 Series
TE Connectivity quality and reliability are guaranteed in this range of insulated and
shielded RF Inductors. The insulated range has a self-extinguishing polyolefin sleeve.
Their small size make them ideal for use when space is at a premium. And they are also
fully protected from environmental factors. Electrostatic and electromagnetic screening is
provided by the magnetic enclosure. A wide range of values are available and the self
extinguishing polyolefin sleeve enhances environmental protection. The SC series was
originally designed for military applications but now has widespread industrial use.
Characteristics - Electrical
SC10
SC15
SC30
SC55
Inductance Range:
See Table - E12 Grid
(Non-standard values available to special order)
Selection Tolerance:
±10%
±10%
±10%
±10%
Power Rating at 70°C:
0.33W
See Below
0.25W
0.30W
Isolation Voltage:
700V DC or AC peak
Limits of Inductance Change:
5% after 1000 hours endurance
Operating Temperature Range: -55°C to +100°C -55°C to +100°C -55°C to +100°C -55°C to +125°C
Recommended Storage Temperature:
0°C to +35°C
Climatic Category:
55/100/21
55/100/21
55/100/21
55/125/21
SC15 Power Rating Values between 0.15uH and 4.7uH - Power Rating 0.33 Watt
Values between 5.6uH and 330uH - Power Rating 0.20 Watt
Packaging and Marking
Type
SC10
SC15
SC30
SC55
Ammo Pack
500 Pieces
500 Pieces
500 Pieces
500 Pieces
Reeled
1500 Pieces
1500 Pieces
2500 Pieces
1500 Pieces
Weight per Component
–
–
–
0.6g
Marking
LC10
LC15
LC30
LC55
Dimensions
1773282 CIS BI 03/2012
Size
SC10
SC15
SC30
SC55
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
L Max.
10.0mm
10.0mm
7.0mm
11.4mm
D Max.
4.2mm
4.5mm
2.8mm
5.2mm
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
l Min.
25mm
30mm
25mm
30mm
d
0.6mm
0.6mm
0.5mm
0.6mm
For email, phone or live chat, go to: te.com/help