55PC0211 Datasheet, PDF (1/1 Pages) Tyco Electronics – This specification sheet forms a part of the latest issue of Raychem Specifiction 55PC.

SPECIFICATION CONTROL DRAWING
55PC0211
TITLE
WIRE, RADIATION-CROSSLINKED, MODIFIED, ETFE-INSULATED,
GENERAL PURPOSE, LIGHT AIRFRAME
Date
07-08-04
Revision
H
This specification sheet forms a part of the latest issue of Raychem Specifiction 55PC.
CONDUCTOR - TIN-COATED COPPER
INSULATION - RADIATION-CROSSLINKED,
MODIFIED ETFE
PART NUMBER
1/
55PC0211-26-*
55PC0211-24-*
55PC0211-22-*
55PC0211-20-*
55PC0211-18-*
55PC0211-16-*
55PC0211-14-*
55PC0211-12-*
55PC0211-10-*
55PC0211- 8-*
55PC0211- 6-*
55PC0211- 4-*
55PC0211- 2-*
55PC0211- 1-*
55PC0211- 0-*
55PC0211-00-*
WIRE CONDUCTOR
SIZE
STRANDING
(AWG) (number x AWG)
26
19 x 38
24
19 x 36
22
19 x 34
20
19 x 32
18
19 x 30
16
19 x 29
14
19 x 27
12
37 x 28
10
37 x 26
8
133 x 29
6
133 x 27
4
133 x 25
2
665 x 30
1
817 x 30
0
1045 x 30
00
1330 x 30
CONSTRUCTION DETAILS
CONDUCTOR DIAMETER
( in.)
LOWER
SPEC
LIMIT
TARGET
VALUE
UPPER
SPEC
LIMIT
MAXIMUM
RESISTANCE
AT 20°C _{LOWER SPEC}
(ohms/1000 ft.)
LIMIT
.0175
.0225
.0285
.0365
.0452
.0514
.0644
.0825
.1050
.158
.198
.250
.320
.360
.395
.440
.0183
.0233
.0293
.0375
.0464
.0527
.0659
.0845
.1070
.163
.205
.260
.330
.370
.415
.462
.0191
.0241
.0301
.0385
.0476
.0538
.0674
.0865
.1090
.169
.212
.268
.340
.380
.425
.475
41.3
26.2
16.2
9.88
6.23
4.81
3.06
2.02
1.26
.701
.445
.280
.183
.152
.116
.091
.0328
.0378
.0438
.0523
.0616
.0690
.0838
.1020
.1252
.188
.233
.300
.370
.410
.449
.505
FINISHED WIRE
DIAMETER
( in.)
TARGET
VALUE
.0345
.0395
.0455
.0540
.0635
.0710
.0860
.1047
.1290
.196
.242
.311
.383
.424
.466
.525
UPPER SPEC
LIMIT
.0362
.0412
.0472
.0557
.0654
.0730
.0882
.1074
.1328
.203
.251
.322
.397
.438
.483
.545
WEIGHT
( lbs/1000 ft. )
TARGET
VALUE
1.38
1.98
2.90
4.38
6.59
8.37
12.88
19.73
31.12
56.8
89.7
145.
227.
278.
343.
450.
UPPER SPEC
LIMIT
1.52
2.13
3.06
4.57
6.90
8.70
13.33
20.30
32.13
59.9
94.7
154.
240.
291.
366.
481.
WIRE RATINGS AND ADDITIONAL REQUIREMENTS
TEMPERATURE RATING: 150°C
Maximum continuous conductor temperature
VOLTAGE RATING: 600 volts (rms) at sea level
COLOR: White preferred
CROSSLINK VERIFICATION: 300 ± 3°C for 1 hour
IDENTIFICATION AND COLOR STRIPING DURABILITY:
125 cycles (250 strokes) (minimum), 500 g weight
INSULATION ELONGATION AND TENSILE STRENGTH: SHRINKAGE: 230 ± 3°C for 1 hour, 0.125 in.(maximum) in 12 in.
Total Insulation,
VOLTAGE WITHSTAND TEST (Post Environmental):
Elongation, 50% (minimum)
2500 volts (rms)
Tensile Strength, 5000 lbf/in² (minimum)
PART NUMBER:
INSULATION FLAWS:
The "*" in the part numbers above shall be replaced by
Spark Test, 3.0 kV (rms)
color code designators.
Impulse Dielectric Test, 8.0 kV (peak)
1/ Example: AWG 22, white: 55PC0211-22-9
INSULATION THICKNESS: .008 in. (nominal) total insulation
AWG 22, white with black stripe: 55PC0211-22-90
Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice.
Tyco Electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer.
Page 1 of 1
1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE
ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER.
DIMENSIONS ARE IN INCHES AND, UNLESS OTHERWISE DESIGNATED, ARE NOMINAL
THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.
R Wire & Cable
501 Oakside Avenue
Redwood City, CA 94063-3800
Phone: [phone]
Fax: [phone]