55PC0114 Datasheet, PDF (1/1 Pages) Tyco Electronics – This specification sheet forms a part of the latest issue of Raychem Specification 55PC.

SPECIFICATION CONTROL DRAWING
55PC0114
TITLE
WIRE, RADIATION-CROSSLINKED, MODIFIED ETFE-INSULATED,
Date
SILVER-COATED HIGH STRENGTH COPPER ALLOY, GENERAL PURPOSE, HOOKUP, 600 VOLT
This specification sheet forms a part of the latest issue of Raychem Specification 55PC.
09-18-03
Revision
D
CONDUCTOR - SILVER-COATED HIGH STRENGTH
COPPER ALLOY
JACKET - RADIATION-CROSSLINKED,
MODIFIED ETFE
PART NUMBER
1/
55PC0114-30-*
55PC0114-28-*
55PC0114-26-*
55PC0114-24-*
55PC0114-22-*
55PC0114-20-*
55PC0114-18-*
55PC0114-16-*
WIRE CONDUCTOR
SIZE
STRANDING
(AWG) (number x AWG)
30
7 x 38
28
7 x 36
26
19 x 38
24
19 x 36
22
19 x 34
20
19 x 32
18
19 x 30
16
19 x 29
CONSTRUCTION DETAILS
CONDUCTOR DIAMETER
(in.)
LOWER
SPEC
LIMIT
.0110
.0140
.0175
.0225
.0285
.0365
.0452
.0514
TARGET
VALUE
.0115
.0145
.0183
.0233
.0293
.0375
.0464
.0527
UPPER
SPEC
LIMIT
.0120
.0150
.0191
.0241
.0301
.0385
.0476
.0538
MAXIMUM
RESISTANCE
AT 20°C
(ohms/1000 ft.)
117.
74.4
44.8
28.4
17.5
10.7
6.8
5.3
LOWER
SPEC
LIMIT
.0221
.0251
.0291
.0341
.0401
.0481
.0573
.0646
WIRE RATINGS AND ADDITIONAL REQUIREMENTS
FINISHED WIRE
DIAMETER
(in.)
TARGET
VALUE
UPPER
SPEC
LIMIT
.0235
.0265
.0305
.0355
.0415
.0495
.0590
.0665
.0249
.0279
.0319
.0369
.0429
.0509
.0607
.0684
WEIGHT
( lbs/1000 ft.)
TARGET
VALUE
.60
.84
1.23
1.81
2.69
4.11
6.27
8.01
UPPER
SPEC
LIMIT
.64
.89
1.34
1.93
2.83
4.27
6.56
8.33
TEMPERATURE RATING: 200°C
Maximum continuous conductor temperature
VOLTAGE RATING: 600 volts (rms) at sea level
COLOR: White preferred
CROSSLINKING PROOF TEST: 300 ± 3°C for 1 hour
IDENTIFICATION AND COLOR STRIPING DURABILITY:
125 cycles (250 strokes) (minimum), 500 g weight
INSULATION ELONGATION AND TENSILE STRENGTH:
Elongation, 50% (minimum)
Tensile Strength, 5000 lbf/in² (minimum)
INSULATION FLAWS:
Spark Test, 3.0 kV (rms)
Impulse Dielectric Test, 8.0 kV (peak)
INSULATION THICKNESS: .006 in. (nominal)
SHRINKAGE: 230 ± 3°C for 1 hour, 0.125 in. (maximum) in 12 in.
VOLTAGE WITHSTAND TEST (Post Environmental):
2500 volts (rms)
PART NUMBER:
The "*" in the part numbers above shall be replaced by color
code designators.
1/ Example:AWG 22, white: 55PC0114-22-9
AWG 22, white with black stripe: 55PC0114-22-90
Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice.
Tyco Electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer.
Page 1 of 1
1/ COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE ADDED TO THE PART NUMBER, AS NECESSARY,
TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER.
DIMENSIONS ARE IN INCHES AND, UNLESS OTHERWISE DESIGNATED, ARE NOMINAL
THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
REFERENCE DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.
R Wire & Cable
501 Oakside Avenue
Redwood City, CA 94063-3800
Phone: [phone]
Fax: [phone]