55A Datasheet, PDF (1/18 Pages) Tyco Electronics – WIRE AND CABLE, ELECTRIC, RADIATION-CROSSLINKED, EXTRUDED, MODIFIED, FLUOROPOLYER-INSULATED

Wire and Cable
501 Oakside Avenue, Redwood City, CA 94063-3800
SPECIFICATION:
55A
THIS ISSUE:
Issue 4
DATE:
7 March 2005
REPLACES:
PAGE:
Amendment 1, Issue 3
1 of 18
WIRE AND CABLE, ELECTRIC, RADIATION-CROSSLINKED,
EXTRUDED, MODIFIED, FLUOROPOLYER-INSULATED
COPPER OR COPPER ALLOY
1.
1.1
1.2
1.2.1
SCOPE
SCOPE
This specification covers radiation-crosslinked, extruded, modified, fluoropolymer-insulated
wire and single- and multiple-conductor cables which may be shielded and jacketed. This
insulation may be used alone or in combination with other insulation materials and is intended
for use as a high-temperature, thin-wall insulation system in military, aerospace, and general
purpose hookup wire applications.
CLASSIFICATION
Products in accordance with this specification shall be of the following types, as specified in
the applicable specification sheet.
Finished Wire
A single conductor, insulated as specified in the applicable specification
sheet.
Finished Cable Any construction other than finished wire, utilizing a wire or wires with
or without shielding, or with or without an outer jacket.
Temperature Rating
The maximum conductor temperature of the finished wire and cable for continuous use shall
be as specified in the applicable specification sheet.
2.
APPLICABLE DOCUMENTS
2.1
GOVERNMENT-FURNISHED DOCUMENTS
The following documents, of the issue in effect on date of invitation for bids or request for
proposal, form a part of this specification to the extent specified herein.
NOTE:
© 2005 Tyco Electronics Corporation. All rights reserved.
ANY COPY OF THIS DOCUMENT THAT DOES NOT HAVE A
RED "CONTROL" STAMP IS AN UNCONTROLLED COPY.