50729 Datasheet, PDF (1/10 Pages) Tyco Electronics –  Hand Crimping Tools

Hand Crimping Tools
Instruction Sheet
408-1559
19 JUN 07 Rev P
PROPER USE GUIDELINES
Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use and low volume
applications. A wide selection of powered application equipment for extended-use, production operations is available.
Color Code for PIDG* and
PLASTI-GRIP* Products
CERTI-CRIMP* Hand
Crimping Tool Ratchet
Control
Wire Size Range
Stamped Here
Color Code for
Sealed Splices
Insulation Crimp Adjustment
Pins in No. 3 Position
Figure 1
HAND CRIMPING TOOL PART NUMBERS
46121
47304
47386
47386-5
47387
47907-1
48518-2
69151-1
69454
169485
1. INTRODUCTION
This instruction sheet covers the Hand Crimping Tools
listed in Figure 1, which are used to crimp the
terminal types listed in Figure 2.
NOTE
i
Dimensions on this sheet are in millimeters
[with inch-equivalent dimensions in brackets].
Figures and illustrations are for identification only
and are not drawn to scale.
Reasons for reissue are provided in Section 9,
REVISION SUMMARY.
2. DESCRIPTION (Figure 1)
The handles and label (if applicable) of the crimping
tools are color–coded to match the color coding of the
connectors to be applied, as listed in Figure 3. The
crimping tools may show more than one color code.
Check Figure 3 to be sure that the correct tool/
connector combination is being used.
For example, tool 47386 can be used to apply PIDG
terminals and splices with a yellow color code, as well
as spare wire caps with a red color code.
Figure 3 lists the number of dots (or rib) that appear
embossed on a crimped item when the connector is
crimped in the correct tooling.
The CERTI–CRIMP hand crimping tool ratchet control
ensures full crimping of terminals and splices. Once
engaged, the ratchet will not release until the tool
handles have been FULLY closed.
E2007 Tyco Electronics Corporation, Harrisburg, PA
TOOLING ASSISTANCE CENTER 1-800-722-1111
All International Rights Reserved
PRODUCT INFORMATION 1-800-522-6752
TE logo and Tyco Electronics are trademarks.
*Trademark. Other products, logos, and company names used are the property of their respective owners.
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.tycoelectronics.com
1 of 10
LOC B