5-1393243-9 Datasheet, PDF (1/3 Pages) Tyco Electronics – General Purpose Relays PCB Relays

General Purpose Relays
PCB Relays
Power PCB Relay RT2
n 2 pole 8A, 2 form C (CO) or 2 form A (NO) contacts
n Sensitive coil 400mW
n 5kV/10mm coil-contact, reinforced insulation
n Ambient temperature 85°C
Potter & Brumfield
Typical applications
Boiler control, timers, garage door control, POS automation, interface
modules
Approvals
VDE REG.-Nr. 6106, UL E214025, cCSAus 14385
Technical data of approved types on request
Contact Data
Contact arrangement 2 form C (CO) or 2 form A (NO)
Rated voltage
250VAC
Max. switching voltage
400VAC
Rated current
8A, UL: 10A
Limiting continuous current
8A, UL: 10A
Limiting making current, max. 4s, duty factor 10% 15A
Breaking capacity max.
2000VA
Contact material
AgNi 90/10
Frequency of operation, with/without load
360/72000h^-1
Operate/release time max., DC coil
8/6ms
Bounce time max., DC coil, form A/form B
4/10ms
Contact ratings
Type
Contact
Load
Cycles
IEC 61810
RT424 DC coil C (CO)
8A, 250VAC, cosφ=1, 85°C
10x10³
RT444 AC coil A (NO)
8A, 250VAC, cosφ=1, 70°C
50x10³
RT424 AC coil C (CO)
8A, 250VAC, cosφ=1, 70°C
30x10³
UL 508
RT424 DC coil A/B (NO/NC) 10A, 250VAC, gen. purpose, 85°C 20x10³
RT424 DC coil A/B (NO/NC) 1/2hp, 240VAC, 85°C
1x10³
RT424 DC coil A/B (NO/NC) Pilot duty, B300, R300, 85°C
6x10³
EN60947-5-1
RTE24 DC coil A/B (NO/NC) AC15, 250VAC, 3A
6.050
RTE24 DC coil A/B (NO/NC) DC13, 24VDC, 2A
6.050
RTE24 DC coil A/B (NO/NC) DC13, 250VDC, 0.2A
6.050
EN60730-1
RT424 DC coil A/B (NO/NC) 6(2)A, 250VAC, 85°C
100x10³
Mechanical endurance
>30x10⁶ operations
VZb
Coil Data
Coil voltage range
Operative range, IEC 61810
Coil insulation system according UL
5 to 110VDC
2
class F
Coil versions, DC coil
Coil
Rated
Operate Release
Coil
Rated coil
code
voltage
voltage
voltage resistance power

VDC
VDC
VDC
Ω±10%
mW
005
5
3.5
0.5
62
403
006
6
4.2
0.6
90
400
009
9
6.3
0.9
200
400
012
12
8.4
1.2
360
400
024
24
16.8
2.4
1440
400
048
48
33.6
4.8
5520
417
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Other coil voltages on request.
Insulation Data
Initial dielectric strength
between open contacts
between contact and coil
between adjacent contacts
Clearance/creepage
between contact and coil
between adjacent contacts
Material group of insulation parts
Tracking index of relay base
1000V_rms
5000V_rms
2500V_rms
≥10/10mm
≥ 3/4mm
IIIa
PTI 250V
04-2011, Rev. 0411
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
1
Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec-
terms of the disclaimer and all chapters of
tion, application notes and all specifications
the ‘Definitions’ section, available at
are subject to change.
http://relays.te.com/definitions