44A9748 Datasheet, PDF (1/2 Pages) Tyco Electronics – This specification sheet forms a part of the latest issue of Raychem Specification 44.

SPECIFICATION CONTROL DRAWING
TITLE
ONE CONDUCTOR CABLE, FLAT BRAID SHIELDED, JACKETED, 600 VOLT
Date
12-18-07
This specification sheet forms a part of the latest issue of Raychem Specification 44.
44A9748
Revision
B
COMPONENT WIRE - 44A0112
SHIELD - SILVER-COATED COPPER
JACKET - RADIATION-CROSSLINKED,
MODIFIED PVDF
PART NUMBER
1/
44A9748-26-*
44A9748-24-*
44A9748-22-*
44A9748-20-*
44A9748-18-*
44A9748-16-*
44A9748-14-*
44A9748-12-*
CONDUCTOR
SIZE
(AWG)
26
24
22
20
18
16
14
12
TABLE I. CABLE CONSTRUCTION DETAILS
SHIELD STRAND
THICKNESS
(± .0004 inch)
JACKET THICKNESS
(in.)
MINIMUM
NOMINAL
.0015
.006
.008
.0015
.006
.008
.0015
.006
.008
.0015
.006
.008
.0015
.006
.008
.0015
.006
.008
.0015
.006
.008
.0015
.006
.008
OUTSIDE DIAMETER
(in.)
NOMINAL MAXIMUM
.057
.062
.063
.068
.070
.076
.078
.084
.088
.095
.095
.103
.112
.122
.131
.142
MAXIMUM
WEIGHT
(lbs/1000 ft.)
3.6
4.6
6.0
7.9
10.8
13.1
18.9
27.7
PART NUMBER
1/
44A9748-26-*
44A9748-24-*
44A9748-22-*
44A9748-20-*
44A9748-18-*
44A9748-16-*
44A9748-14-*
44A9748-12-*
TABLE II. CABLE PERFORMANCE DETAILS
BEND TESTING
MANDREL DIAMETER
(inch) (±3%)
WEIGHT
(lb) (±3%)
LIFE CYCLE, IMMERSION
AND ACCELERATED AGING
COLD
BEND
LIFE CYCLE, IMMERSION
AND ACCELERATED AGING
3.00
3.00
.125
3.00
3.00
.188
3.00
3.00
.188
3.00
3.00
.188
3.00
3.00
.250
3.00
3.00
.250
3.00
3.00
.500
6.00
6.00
.500
COLD
BEND
.750
.750
1.50
1.50
1.50
1.50
4.50
4.50
NOTE: Nominal values are for information only.
Nominal values are not requirements.
Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice.
Tyco Electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer.
1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. HOWEVER, DUE TO LENGTH LIMITATIONS OF THE RAYCHEM PART NUMBER,
AN ALTERNATIVE COLOR CODE MAY REPLACE MIL-STD-681 COLOR CODE DESIGNATORS. (EXAMPLE: “901/902...” MAY BE REPLACED BY “Axxx”.) OTHER CODES AND
SUFFIXES MAY BE ADDED TO THE PART NUMBER AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER.
Page 1 of 2
The TE logo, Tyco Electronics and Raychem are trademarks.
DIMENSIONS ARE IN INCHES, AND UNLESS OTHERWISE DESIGNATED ARE NOMINAL
THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.
Raychem Wire & Cable
501 Oakside Avenue
Redwood City, CA 94063-3800
Phone: [phone]
Fax: [phone]
© 2006-2007 Tyco Electronics Corporation. All rights reserved.