44A0212 Datasheet, PDF (1/2 Pages) Tyco Electronics – This specification sheet forms a part of the latest issue of Raychem Specification 44 and MIL-W-81044 as applicable.

SPECIFICATION CONTROL DRAWING
44A0212
TITLE
WIRE, RADIATION-CROSSLINKED, POLYALKENE-INSULATED,
LIGHT WEIGHT, GENERAL PURPOSE, 1000 VOLT
Date
12-7-05
Revision
D
This specification sheet forms a part of the latest issue of Raychem Specification 44 and MIL-W-81044 as applicable.
PRIMARY INSULATION - RADIATION-CROSSLINKED,
CONDUCTOR - SILVER-COATED COPPER
EXTRUDED POLYALKENE
JACKET - RADIATION-CROSSLINKED,
MODIFIED PVF₂
Thickness: .004 ± .001 in.
PART NUMBER
1/
44A0212-26-*
44A0212-24-*
44A0212-22-*
44A0212-20-*
44A0212-18-*
44A0212-16-*
44A0212-14-*
44A0212-12-*
44A0212-10-*
44A0212- 8-*
44A0212- 6-*
44A0212- 4-*
WIRE
SIZE
(AWG)
26
24
22
20
18
16
14
12
10
8
6
4
TABLE I. CONSTRUCTION DETAILS
MAXIMUM
FINISHED WIRE
CONDUCTOR
STRANDING
(number x AWG)
DIAMETER
STRANDED
CONDUCTOR
(in.)
MAXIMUM
RESISTANCE AT
20°C
(ohms/1000ft.)
DIAMETER
(in.)
19 x 38
.021
38.4
.040 ± .002
19 x 36
.026
24.3
.046 ± .002
19 x 34
.033
15.1
.054 ± .002
19 x 32
.041
9.19
.062 ± .002
19 x 30
.052
5.79
.073 ± .003
19 x 29
.058
4.52
.081 ± .003
19 x 27
.072
2.88
.098 ± .004
37 x 28
.090
1.90
.117 ± .004
37 x 26
.118
1.19
.146 ± .004
133 x 29
.176
.658
.206 ± .006
133 x 27
.218
.418
.254 ± .007
133 x 25
.272
.264
.308 ± .008
MAXIMUM
WEIGHT
(lbs/1000 ft.)
1.6
2.4
3.5
5.1
7.7
9.8
14.7
22.1
35.6
61.8
94.5
150.
PART NUMBER
1/
44A0212-26-*
44A0212-24-*
44A0212-22-*
44A0212-20-*
44A0212-18-*
44A0212-16-*
44A0212-14-*
44A0212-12-*
44A0212-10-*
44A0212- 8-*
44A0212- 6-*
44A0212- 4-*
TABLE II. PERFORMANCE DETAILS
BEND TESTING
MANDREL DIAMETER
(inch) (± 3%)
WEIGHT
(lb) (± 3%)
IMMERSION,
LIFE CYCLE AND
ACCELERATED AGING
.500
.500
.750
.750
1.00
1.00
1.50
2.00
3.00
3.00
4.00
5.00
COLD
BEND
.750
1.00
1.00
1.00
1.50
1.50
2.00
2.00
3.00
4.00
5.00
6.00
WRAP
.250
.250
.250
.250
.375
.375
.500
.500
.750
.750
1.00
1.25
IMMERSION,
LIFE CYCLE AND
ACCELERATED AGING
.375
.375
.375
.500
.500
1.00
1.00
1.50
2.00
3.00
3.00
3.00
COLD
BEND
1.00
2.00
2.00
3.00
3.00
4.00
4.00
4.00
4.00
5.00
8.00
8.00
Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice.
Tyco Electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer.
1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES
AND SUFFIXES MAY BE ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL
REQUIREMENTS IMPOSED BY THE PURCHASE ORDER.
DIMENSIONS ARE IN INCHES, AND UNLESS OTHERWISE DESIGNATED ARE NOMINAL.
Page 1 of 2
THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.
R Wire & Cable
501 Oakside Avenue
Redwood City, CA 94063-3800
Phone: [phone]
Fax: [phone]
© 2005 Tyco Electronics Corporation. All rights reserved.