44A0114 Datasheet, PDF (1/2 Pages) Tyco Electronics – This specification sheet forms a part of the latest issue of Raychem Specification 44.

SPECIFICATION CONTROL DRAWING
WIRE, RADIATION-CROSSLINKED, POLYALKENE-INSULATED,
LIGHTWEIGHT, GENERAL PURPOSE, 600 VOLT
12-11-09
This specification sheet forms a part of the latest issue of Raychem Specification 44.
44A0114
E
CONDUCTOR - SILVER-COATED HIGH-STRENGTH
COPPER ALLOY
PRIMARY INSULATION - RADIATION-CROSSLINKED,

EXTRUDED POLYALKENE
JACKET - RADIATION-CROSSLINKED,
MODIFIED PVDF
Thickness: .003 ± .001 in.
PART NUMBER
1/
44A0114-26-*
44A0114-24-*
44A0114-22-*
44A0114-20-*
44A0114-18-*
44A0114-16-*
WIRE
SIZE
(AWG)
26
24
22
20
18
16
CONDUCTOR
STRANDING
(number x AWG)
19 x 38
19 x 36
19 x 34
19 x 32
19 x 30
19 x 29
TABLE I. CONSTRUCTION DETAILS
DIAMETER OF
STRANDED
CONDUCTOR
(in.)
MINIMUM MAXIMUM
MAXIMUM
RESISTANCE
AT 20°C
(ohms/1000 ft)
.018
.020
44.8
.023
.025
28.4
.029
.032
17.5
.037
.040
10.7
.046
.050
6.8
.052
.057
5.3
FINISHED WIRE
DIAMETER
(in.)
MAXIMUM
WEIGHT
(lbs/1000 ft.)
.034 ± .002
1.4
.040 ± .002
2.1
.047 ± .002
3.1
.055 ± .002
4.6
.065 ± .002
7.0
.072 ± .003
8.9
PART NUMBER
1/
44A0114-26-*
44A0114-24-*
44A0114-22-*
44A0114-20-*
44A0114-18-*
44A0114-16-*
TABLE II. PERFORMANCE DETAILS
BEND TESTING
MANDREL DIAMETER
(inch) (± 3%)
IMMERSION,
LIFE CYCLE AND
ACCELERATED AGING
COLD
BEND
WRAP
.500
.500
.250
.500
.500
.250
.750
.750
.250
.750
.750
.250
1.00
1.00
.375
1.00
1.00
.375
WEIGHT
(lb) (± 3%)
IMMERSION,
LIFE CYCLE AND
ACCELERATED AGING
.250
.375
.375
.375
.500
.500
COLD
BEND
.500
.500
1.00
1.00
1.00
1.00
Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice.
Tyco Electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer.
1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE ADDED
TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER.
Page 1 of 2
The TE logo, Tyco Electronics and Raychem are trademarks.
DIMENSIONS ARE IN INCHES, AND UNLESS OTHERWISE DESIGNATED ARE NOMINAL.
THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.
Raychem Wire & Cable
501 Oakside Avenue
Redwood City, CA 94063-3800
Phone: [phone]
Fax: [phone]
© 2009 Tyco Electronics Corporation. All rights reserved.