44A0112 Datasheet, PDF (1/2 Pages) Tyco Electronics – This specification sheet forms a part of the latest issue of Raychem Specification 44 and MIL-W-81044 as applicable

SPECIFICATION CONTROL DRAWING
44A0112
Title
WIRE ELECTRIC, RADIATION-CROSSLINKED POLYALKENE INSULATED,
Date
Revision
SILVER-COATED COPPER, LIGHTWEIGHT, GENERAL PURPOSE, 600 VOLT
05-20-03
C
This specification sheet forms a part of the latest issue of Raychem Specification 44 and MIL-W-81044 as applicable
CONDUCTOR – SILVER-COATED COPPER
PRIMARY INSULATION – RADIATION-CROSSLINKED
EXTRUDED POLYALKENE
JACKET – RADIATION-CROSSLINKED
MODIFIED PVF2
Thickness .003 ± .001 in.
PART NUMBER
1/
44A0112-26-*
44A0112-24-*
44A0112-22-*
44A0112-20-*
44A0112-18-*
44A0112-16-*
44A0112-14-*
44A0112-12-*
WIRE
SIZE
(AWG)
26
24
22
20
18
16
14
12
TABLE I. CONSTRUCTION DETAILS
CONDUCTOR
STRANDING
(number x AWG)
DIAMETER OF
STRANDED
CONDUCTOR
(in.)
MINIMUM MAXIMUM
FINISHED WIRE
MAXIMUM
RESISTANCE DIAMETER
AT 20°C
(in.)
(ohms/1000 ft)
19 x 38
.018
.020
38.4
.034 ± .002
19 x 36
.023
.025
24.3
.040 ± .002
19 x 34
.029
.032
15.1
.047 ± .002
19 x 32
.037
.040
9.19
.055 ± .002
19 x 30
.046
.050
5.79
.065 ± .002
19 x 29
.052
.057
4.52
.072 ± .003
19 x 27
.065
.072
2.88
.089 ± .004
37 x 28
.084
.089
1.90
.108 ± .004
MAXIMUM
WEIGHT
(lb/1000 ft)
1.4
2.1
3.1
4.6
7.0
8.9
13.9
21.7
PART NUMBER
1/
44A0112-26-*
44A0112-24-*
44A0112-22-*
44A0112-20-*
44A0112-18-*
44A0112-16-*
44A0112-14-*
44A0112-12-*
TABLE II. PERFORMANCE DETAILS
BEND TESTING
MANDREL DIAMETER
(inch) (± 3%)
IMMERSION
LIFE CYCLE AND
ACCELERATED AGING
COLD
BEND
WRAP
.500
.500
.250
.500
.500
.250
.750
.750
.250
.750
.750
.250
1.00
1.00
.375
1.00
1.00
.375
1.50
1.50
.500
2.00
2.00
.500
WEIGHT
(lb) (± 3%)
IMMERSION
LIFE CYCLE AND
ACCELERATED AGING
.250
.375
.375
.375
.500
.500
1.00
1.00
COLD
BEND
.500
.500
1.00
1.00
1.00
1.00
3.00
3.00
Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice.
Tyco Electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer.
1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND
SUFFIXES MAY BE ADDED TO THE PART NUMBER. AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS
IMPOSED BY THE PURCHASE ORDER.
Page 1 of 2
DIMENSIONS ARE IN INCHES AND, UNLESS OTHERWISE DESIGNATED, ARE NOMINAL.
THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.
Wire & Cable
501 Oakside Avenue
Redwood City, CA 94063-3800
Phone: [phone]
Fax: [phone]