408-9910 Datasheet, PDF (1/4 Pages) Tyco Electronics – Reasons for reissue of this instruction sheet are provided in Section 8, REVISION SUMMARY.

Seating Tools 58511-[ ]
For Z-PACK* 2mm
FB (Futurebus+) Pin Headers
Seating Tool
58511-[ ]
Socket Setscrews
(Quantity Matches
Number and Size
of Blades)
Instruction Sheet
408-9910
16 SEP 08 Rev F
Adapter
Blade
Typical Z-PACK
2mm FB Pin Header
Printed Circuit
Board (Ref)
Compliant Lead Contact
Board Retention Feature
Printed Circuit Board
Support Fixture
(Customer Supplied)
Figure 1
1. INTRODUCTION
This instruction sheet covers the use and
maintenance of Seating Tools 58511–[ ]. See
Figure 1. The tools are used to seat Z–PACK 2mm
FB (Futurebus+) pin headers onto a printed circuit
(pc) board. These headers contain compliant lead
contacts to allow solderless pc board installation.
Read these instructions and understand them before
using the seating tool.
NOTE
i
Dimensions on this sheet are in metric units [with
U.S. customary units in brackets]. Figures and
illustrations are for reference only and are not
drawn to scale.
Reasons for reissue of this instruction sheet are
provided in Section 8, REVISION SUMMARY.
2. DESCRIPTION
Each seating tool is an assembly of one or more
different length blades to one of five different length
adapters. The choice of lengths allows you to build
tools to seat any of the available pin header sizes.
Figure 2 matches tool part number to the size of the
pin header to be seated. The adapter straightens the
header, during the cycle of the applicator ram, to
provide proper insertion into the pc board. When
seating the header, the blades are positioned over the
contact shoulders to prevent damage to the contacts.
Each tool is designed for a specific combination of
contacts in a row and number of rows in a header.
During seating, the tool sits inside the header housing
with the blades engaging the housing floor and
contact shoulders, preventing contacts from pushing
out of the housing.
E2008 Tyco Electronics Corporation, Harrisburg, PA
TOOLING ASSISTANCE CENTER 1-800-722-1111
All International Rights Reserved
PRODUCT INFORMATION 1-800-522-6752
TE logo and Tyco Electronics are trademarks.
*Trademark. Other products, logos, and company names used are the property of their respective owners.
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.tycoelectronics.com
1 of 4
LOC B