English
Language : 

408-9515 Datasheet, PDF (1/5 Pages) Tyco Electronics – Ribbon Cable Notcher
Ribbon Cable Notcher
854449- [ ]
Instruction Sheet
408- 9515
30 DEC 09 Rev C
Retaining Ring
(2 Places)
Upper Die Plate
Subassembly
Pressure Plate
Air Control
Valve
To Air Supply
Cable Stop
Plate
Pressure Plate Dowel
Post (2 Places)
Cable Support
Plate
Die
Upper Tooling
Guard
Scrap Chute
RIBBON
CABLE
NOTCHER
CABLE
CENTERLINE SIZE
(mm [in.]) (AWG)
854449--1
854449--2
854449--3
854449--4
2.54 [.100]
2.54 [.100]
3.96 [.156]
2.54 [.100]
24--22
28--26
24--18
28--22
CONNECTOR
TYPE
SIZE
(Number of
Positions)
AMPMODU*, MT, MTE
2--28
AMPMODU, MT, MTE, MTA 2--28
MTA
2--24
MTA
2--28
NOTCH (mm [in.])
WIDTH OF
WEB
REMOVED
LENGTH
End Feed Through
1.27 [.050]
1.42 [.056]
1.80 [.071]
10.92
[.43]
20.32 [.80]
1.07 [.042]
Figure 1
1. INTRODUCTION
Ribbon Cable Notcher 854449--[ ] is used to separate
individual wires of ribbon cable for application onto
the connectors listed Figure 1.
NOTE
i
Dimensions in this instruction sheet are in
millimeters [with inches in brackets]. Figures are
not drawn to scale.
The ribbon cable notcher is designed to be used with
any one of the following power units:
— Pneumatic Applicator Frame Assembly 91112--2
(408--7763)
— 2700--lb Pneumatic Power Unit 312522--1
(409--5843) with Adapter Kit 854468--2 (408--9687)
— AMP--O--LECTRIC* Model “K” Terminating
Machine 2--565435--2 or 565435--5 (409--5128)
with Adapter Kit 854468--1 (408--9687)
NOTE
i
Machine 565435- 5 is no longer available for new
applications, but can still be used for existing
applications.
— Manual Arbor Frame Assembly 58024--1
(408--6923)
NOTE
i
This frame assembly is not recommended for use
on connectors with more than 14 positions.
For operation and adjustment of the power units, refer
to the instruction sheet (408--series) or customer
manual (409--series) included with the power unit.
Reasons for reissue of this instruction sheet are
provided in Section 8, REVISION SUMMARY.
E2009 Tyco Electronics Corporation, Harrisburg, PA TOOLING ASSISTANCE CENTER 1- 800- 722- 1111
All International Rights Reserved
PRODUCT INFORMATION 1- 800- 522- 6752
TE logo and Tyco Electronics are trademarks.
*Trademark. Other products, logos, and company names used are the property of their respective owners.
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.tycoelectronics.com
1 of 5
LOC B